Positioning The Design In The Hoop/Creating Hoops - Bernina Happy Voyager Resource Manual

Happy Voyager

Positioning the Design in the Hoop/Creating Hoops

14
Description of function
The FRAME menu allows the user to select a rep-
resentation of the hoop placed on the machine to
visually position the design within the hoop. It also
allows to create customized round and square
hoops.
Select FRAME menu and press SET to enter.
If Message "Check the top of pattern data" select
OK.
Select the appropriate hoop type (Round or
Square) , press SET.
Select the hoop size, press SET.
Design is placed in the center of the hoop.
The most outer ting presents the boundary of the
hoop. The red inner outline represents the safe
embroidery area. The pattern is by default in the
center and is represented in blue.