Advertisement
With the zebra selected, click on the Wreath tool
and select "6" from the drop down menu.
Move the mouse without clicking until the zebras
are positioned in a circle with the front feet of
one zebra close to, but not overlapping, the next
zebra. Click the mouse when satisfied with the
placement.
Save the design as Circle of Zebras.ART.
Click on the Write to Machine icon and send the
design to a USB stick or your embroidery system.
Circle of Animals
(14" x 20" moss yellow fabric; bind with bias color 2)
Open design
BC01418 — the
small plant.
Right click on the
Show Hoop icon.
Select the Jumbo
Hoop #26 and place
a check in the box next to Display Hoops.
Click OK.
Note: If you do not have an 830 with the Jumbo
Hoop, continue to work in the Large Oval Hoop.
The design will be too large to stitch in one hoop-
ing, so you will need to reposition the designs to fit,
or use the Multi-Hooping feature of BERNINA Em-
broidery Software 6.
Click the Show All icon.
Select File > Insert Design and select design
BC01408 — the small hippo. Move it above the
plant.
Select File > Insert Design and select design
BC01402 — the small monkey. Move it below the
plant.
Select File > Insert Design and select design
BC01404 — the small elephant. Move it to the
right of the plant. Click the elephant design again
and the sizing handles will become hollow. Click
and drag the upper right hollow handle and rotate
the design clockwise approximately -40°. (Watch
the coordinates in the lower prompt bar.)
©2011 BERNINA of America, Inc.
With the elephant still selected, move it down in
the hoop until its rear feet are aligned with the
plant.
Select File > Insert Design and select design
BC01406 — the small zebra. Move it to the
left of the plant. Click the zebra design again
drag the upper right hollow handle to rotate the
design clockwise approximately 59°.
With the zebra still selected, move it down until
its front hooves are aligned with the plant.
Save the design as Circle of Animals.ART.
Click on the Write to Machine icon and send the
design to a USB stick or your embroidery sys-
tem.
Coconut Tree and Monkey
(10" x 14" green fabric; bind with bias color 2)
Open design
BC01417 — the
coconut tree.
Select File > Insert
Design and select
design BC01423 —
the snail. Move it to
the lower right of the mushroom.
Right click on the Show Hoops icon. Select the
artista 255 x 145 hoop and place a check in the
box next to Display Hoops. Click OK.
Select File > Insert Design and select design
BC01415 — the monkey. Move it to the right of
the coconut tree.
Save the design as Coconut Tree and Mon-
key.ART.
Click on the Write to Machine icon and send
the design to a USB stick or your embroidery
system.
jpl
Page 9 of 10
Advertisement
