7800 SERIES S7820 REMOTE RESET MODULE
Electrical Connectors (included):
Part no. 203541 ControlBus 5-Wire Electrical Connector,.
Operating: -40°F to 140°F (-40°C to 60°C).
Storage: -40°F to 150°F (-40°C to 66°C).
Operating: 85% RH continuous, noncondensing.
Vibration: 0.5 G environment.
See Fig. 1.
3 ounces (86 grams) unpacked.
Fig. 1. Remote Reset Module dimensions in in. (mm).
When purchasing replacement and modernization products from your TRADELINE® wholesaler or distributor, refer to the
TRADELINE® Catalog or price sheets for complete ordering number.
If you have additional questions, need further information, or would like to comment on our products or services, please write or
Your local Home and Building Control Sales Office (check white pages of your phone directory).
Home and Building Control Customer Logistics
Honeywell, 1885 Douglas Drive North
Minneapolis, Minnesota 55422-4386
In Canada—Honeywell Limited/Honeywell Limitée, 35 Dynamic Drive, Scarborough, Ontario M1V 4Z9.
International Sales and Service Offices in all principal cities of the world. Manufacturing in Australia, Canada, Finland, France,
Germany, Japan, Mexico, Netherlands, Spain, Taiwan, United Kingdom, U.S.A.
When Installing this Product...
1. Read these instructions carefully. Failure to follow them
2. Check the ratings given in the instructions and marked
3. The installer must be a trained, experienced, flame
4. Disconnect the power supply before beginning
5. Wiring must comply with all applicable codes,
6. After installation is complete, check out the product
Install the S7820 Remote Reset Module where the relative
humidity never reaches the saturation point. The S7820
Remote Reset Module is designed to operate in a maximum
85% relative humidity (RH) continuous, noncondensing,
Do not install the S7820 Remote Reset Module where it can
be exposed to vibration in excess of 0.5G continuous
could damage the product or cause a hazardous
on the product to make sure the product is suitable for
safeguard control technician.
installation to prevent electrical shock and equipment
damage. More than one power supply disconnect may
ordinances and regulations.
operation as provided in these instructions.