Installing
5.1 Installing an S7-300
Accessories included
Installation accessories are included with the module package. The appendix contains a list
of accessories and spare parts together with the corresponding order numbers.
Table 5-1
Module
CPU
Signal module (SM)
Function Module (FM)
Communication module (CP)
Interface module (IM)
5-2
Module accessories
Accessories included
1 x Slot number label
Inscription labels
1 Bus connector
1 Labeling strip
1 Bus connector
1 Inscription label
(only CP 342-2)
1 x Slot number label (only
IM 361 and IM 365)
Explanation
For assigning slot numbers
for the MPI address and Firmware
Version (all CPUs)
for labeling of integrated inputs
and outputs (CPU 31xC only)
Tip: Templates for labeling strips
are available on the Internet at
http://www.ad.siemens.de/csinfo,
under article ID 11978022.
For electrical interconnection of
modules
For labeling module I/O
Tip: Templates for labeling strips
are available on the Internet at
http://www.ad.siemens.de/csinfo
under article ID 11978022.
For electrical interconnection of
modules
For labeling the AS interface
connector
Tip: Templates for labeling strips
are available on the Internet at
http://www.ad.siemens.de/csinfo
under article ID 11978022.
For assigning slot numbers on
racks 1 to 3
S7-300, CPU 31xC and CPU 31x: Installation
Operating Instructions, Edition 08/2004, A5E00105492-05