Intermodule - HP 16500C Programmer's Manual

Table 13-1 INTermodule Parameter Values
Parameter
module
user_lev
index
setting

:INTermodule

Selector
:INTermodule
The INTermodule selector specifies INTermodule as the subsystem the
commands or queries following will refer to. Because the INTermodule
command is a root level command, it will normally appear as the first element
of a compound header.
Example
OUTPUT XXX;":INTERMODULE:HTIME?"
Value
An integer, 1 through 5 for HP 16500C alone. 1 through 10
with the HP 16501A connected.
A real number from –4.0 to +5.0 volts in 0.02 volt increments
An integer, 1 through 5 for HP 16500C alone. 1 through 10
with the HP 16501A connected.
A numeric, – 1.0 to 1.0 in seconds.
INTermodule Subsystem
:INTermodule
13–5