Remove The Memory Card; Charge The Battery - Nokia E5–00 User Manual

Hide thumbs Also See for E5–00:
Table of Contents

Advertisement

4
Swing the card holder back. Slide
the card holder to lock it.
5
Replace the battery and back cover.
Use only compatible microSD cards
approved by Nokia for use with this
device. Nokia uses approved industry
standards for memory cards, but some
brands may not be fully compatible with
this device. Incompatible cards may
damage the card and the device and
corrupt data stored on the card.

Remove the memory card

1
Switch the device off.
2
Remove the back cover and the
battery.
3
Open the memory card holder, and
remove the memory card. Close the
memory card holder.
4
Replace the battery and back cover.

Charge the battery

Your battery has been partially charged
at the factory. If the device indicates a
low charge, do the following:
1
Connect the charger to a wall outlet.
2
Connect the charger plug to the
device.
www.nokia.com/support
Cyan
Cyan
Magenta
Magenta
Get started
If you are using a USB charger,
connect the charger plug to the USB
connector.
3
When the device indicates a full
charge, disconnect the charger from
the device, then from the wall
outlet.
You do not need to charge the battery
for a specific length of time, and you can
use the device while it is charging. If the
battery is completely discharged, it may
take several minutes before the
charging indicator appears on the
display or before any calls can be made.
Charging with the USB data cable
Charging with the USB data cable is
slower than charging with the charger.
Charging with the USB data cable may
not work if you use a USB hub. USB hubs
may be incompatible for charging a USB
device.
Yellow
Yellow
Black
Black
11

Advertisement

Table of Contents
loading

Table of Contents