What To Do If - Electrolux EOC 68342 User Manual

New oven light bulb must have the
same parameters as your previous one.
4. Install the glass cover.
Shelf Support Rails
Removing the shelf support rails
1. Pull the front of the shelf support rail
away from the side wall.

WHAT TO DO IF...

Warning! Refer to "Safety information"
chapter.
Problem
The oven does not heat
up.
The display shows F11.
The oven lamp does not
operate.
Steam and condensation
collect on the food and in
the oven.
If you cannot find a solution to the problem
yourself, contact your dealer or the service
centre.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
Possible cause
The oven is deactivated.
The clock is not set.
The necessary settings are not set.
The Child Lock is activated.
The fuse in the fuse box is released. Examine the fuse. If the fuse is re-
The meat probe is not correctly in-
stalled into the meat probe socket.
The oven lamp is defective.
You kept the dish in the oven for
too long.
2. Pull the rear shelf support rail away from
the side wall and remove it.
Installing the shelf support rails
Install the shelf support rails in opposite se-
quence.
The rounded ends of the shelf support
rails must point to the front!
Activate the oven.
Set the clock.
Make sure the settings are correct.
Refer to "Child Lock".
leased more than one time, con-
tact a qualified electrician.
Put in the meat probe as far as pos-
sible.
Refer to "Replace the oven lamp".
Do not keep the dishes in the
oven for longer than 15-20 mi-
nutes after the cooking ends.
The necessary data for the service centre is
on the rating plate. The rating plate is on
the front frame of the oven cavity.
.........................................
.........................................
.........................................
electrolux 17
Remedy