PASCO PasPort K Quick Start

Type K Temperature Sensor
PS-2134
Type K sensor box
Sensor Specifications
Sensor/Probe tip range:
Probe insulation range:
Accuracy:
Resolution:
Default sample rate:
Maximum sample rate:
Sensing element:
®
Type K Temperature Sensor
PS-2134
Type K sensor box
Sensor Specifications
Sensor/Probe tip range:
Probe insulation range:
Accuracy:
Resolution:
Default sample rate:
Maximum sample rate:
Sensing element:
®
Type K probe
º º
-200 C to +1000 C
º º
-73 C to +482 C
º C or 3% of reading, which-
±3
ever is greater
º
0.1 C
2 samples per second
10 samples per second
chromel and alumel thermocouple
800-772-8700 • 916-786-3800 • techsupp@pasco.com • www.pasco.com
Type K probe
-200 º C to +1000 º C
º º
-73 C to +482 C
º C or 3% of reading, which-
±3
ever is greater
º
0.1 C
2 samples per second
10 samples per second
chromel and alumel thermocouple
800-772-8700 • 916-786-3800 • techsupp@pasco.com • www.pasco.com
T y p e K S e n s o r Q u i c k S t a r t
The PS-2134 Type K Temperature Sensor measures high temperatures of gases,
open flames, or objects ranging from -200 to +1000 degrees Celsius.
A d d it i o n al Eq u ip m e n t N e e d e d
TM
• PASPORT interface (USB Link, PowerLink, Xplorer, etc.)
®
• EZscreen or DataStudio
Eq u ip m e n t S e t up
1. Connect the PASPORT interface to a USB port on your computer or to a USB hub.
2. Plug the cable of the Type K probe into the Type K sensor box.
3. Connect the Type K Sensor to the PASPORT interface.
4. The software launches when it detects a PASPORT sensor. From the PASPORTAL
window, select a point of entry.
3
T y p e K S e n s o r Q u i c k S t a r t
The PS-2134 Type K Temperature Sensor measures high temperatures of gases,
open flames, or objects ranging from -200 to +1000 degrees Celsius.
A d d i ti o n a l E qu i p m e nt N ee d ed
TM
• PASPORT interface (USB Link, PowerLink, Xplorer, etc.)
®
• EZscreen or DataStudio
Eq ui p m e n t S e tu p
1. Connect the PASPORT TM interface to a USB port on your computer or to a USB hub.
2. Plug the cable of the Type K probe into the Type K sensor box.
3. Connect the Type K Sensor to the PASPORT interface.
4. The software launches when it detects a PASPORT sensor. From the PASPORTAL
window, select a point of entry.
1
3
software (version 1.8.5 or later)
1
software (version 1.8.5 or later)
CARD 1A
2
4
012-08453B
CARD 1A
2
4
012-08453B