Snapper NZM19480KWV Parts Manual
  1. Manuals
  2. Brands
  3. Snapper Manuals
  4. Lawn Mower
  5. NZM19480KWV
  6. Parts manual

Snapper NZM19480KWV Parts Manual

Mid mount z-rider zero turning hydro drive nzm series 0 & 1
Hide thumbs Also See for NZM19480KWV:
Table of Contents

Advertisement

Quick Links

COPYRIGHT © 2006
SNAPPER PRODUCTS, INC.
ALL RIGHTS RESERVED.
ZERO TURNING HYDRO DRIVE
Revision 4,
Parts Manual for
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
McDonough, GA, 30253 U.S.A.
1/18/2006
MODEL
NZM19480KWV
NZM19481KWV
NZM21520KWV
NZM21521KWV
NZM25611KWV
NZM27611KH
Manual No.
7006930
TP 400-5017-4-NZ-N

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NZM19480KWV and is the answer not in the manual?

Questions and answers

Related Manuals for Snapper NZM19480KWV

Summary of Contents for Snapper NZM19480KWV

  • Page 1 ZERO TURNING HYDRO DRIVE COPYRIGHT © 2006 SNAPPER PRODUCTS, INC. ALL RIGHTS RESERVED. Parts Manual for MID MOUNT Z-RIDER NZM SERIES 0 & 1 McDonough, GA, 30253 U.S.A. Revision 4, 1/18/2006 MODEL NZM19480KWV NZM19481KWV NZM21520KWV NZM21521KWV NZM25611KWV NZM27611KH Manual No.

  • Page 3: Table Of Contents

    PAGE GROUP CASTER WHEEL ASSEMBLY DRIVE TIRE & WHEEL ASSEMBLY FRONT FRAME ASSEMBLY PT.1 FRONT FRAME ASSEMBLY PT.2 REAR FRAME & TANK BRACKETS FUEL TANK ASSEMBLY MUFFLER GUARD ASSEMBLY TWIN STICK CONTROL ASSEMBLY PT.1 TWIN STICK CONTROL ASSEMBLY PT.2 PARKING BRAKE ASSEMBLY HYDRO PUMP ASSEMBLIES HYDRO PUMP LINKAGE HOSE ASSEMBLY (Series 0) PT.1...

  • Page 4: Caster Wheel Assembly

    CASTER WHEEL ASSEMBLY Manual No. 7006930 MID MOUNT Z-RIDER TP 400-5017-4-NZ-N NZM SERIES 0 & 1...
  • Page 5 CASTER WHEEL ASSEMBLY Item Part No Description 7058744 WELDMENT, Caster Yoke 7075398 WELDMENT, Caster Yoke, 7-1/4” Wide 7091773 SCREW, 1/2-13 x 7” Hex Head Cap, GR5 7092094 SCREW, 1/2-13 x 9-1/2” Hex Head Cap, GR5 7091325 NUT,1/2-13 Nyloc 7035476 SPACER, Bearing, 5.29” Long 7075462 SPACER, Bearing, 7.29”...

  • Page 6: Drive Tire & Wheel Assembly

    DRIVE TIRE & WHEEL ASSEMBLY Manual No. 7006930 MID MOUNT Z-RIDER TP 400-5017-4-NZ-N NZM SERIES 0 & 1...
  • Page 7 DRIVE TIRE & WHEEL ASSEMBLY Item Part No Description 7059161 ASSEMBLY, Rear Tire & Rim (Incl. Items 2, 3 & 4) 7075473 ASSEMBLY, Rear Tire & Rim (Incl. Items 2, 3 & 4) 7074157 TIRE, 23 x 10.5 - 12 NHS 4PR Kenda “Super Turf” 4 Ply 7075478 TIRE, 24 x 12.00 - 12 Kenda “Super Turf”...

  • Page 8: Front Frame Assembly Pt.1

    FRONT FRAME ASSEMBLY PT.1 Manual No. 7006930 MID MOUNT Z-RIDER TP 400-5017-4-NZ-N NZM SERIES 0 & 1...
  • Page 9 FRONT FRAME ASSEMBLY PT.1 Item Part No Description 7058032 WELDMENT, Front Frame 7044821 WELDMENT, Front Frame GROUP, Front Wheel (see Caster Wheel Assembly Page) 7074723 GREASE SEAL 7058554 BEARING, Tapered Roller 7029137 SPACER, Jackstaff 7092083 CASTLE NUT, 1-1/ UNF, GR B 7090841 ROLL PIN, 3/16 x 1-1/2”...
  • Page 10 FRONT FRAME ASSEMBLY PT.1 Manual No. 7006930 MID MOUNT Z-RIDER TP 400-5017-4-NZ-N NZM SERIES 0 & 1...
  • Page 11 FRONT FRAME ASSEMBLY PT.1 Item Part No Description 7090122 WASHER, 3/8” Flat SAE 7075330 COVER, Plastic 7012117 BUSHING, 3/8 Plastic 7076986 ROLLPIN,1/8 x 7/8” 7075027 MAT, Footpan 7075028 MAT, Floor Pan Footnotes: MID MOUNT Z-RIDER NZM SERIES 0 & 1 Note Manual No.

  • Page 12: Front Frame Assembly Pt.2

    FRONT FRAME ASSEMBLY PT.2 Manual No. 7006930 MID MOUNT Z-RIDER TP 400-5017-4-NZ-N NZM SERIES 0 & 1...
  • Page 13 FRONT FRAME ASSEMBLY PT.2 Item Part No Description ASSY, Deck Lift Handle 7043803 BRACKET, Deck Support 7044858 SWIVEL, Timing Rod (1/2-13 External Thread) 7044870 SHIM PLATE 7058148 WELDMENT, Rear Lift 7058181 WELDMENT, Front Deck Lift 7058182 WELDMENT, Bellcrank Lift 7059173 CHAIN, 3 Links 7074579 ROD, Timing (1/2-13 Thread)

  • Page 14: Rear Frame & Tank Brackets

    REAR FRAME & TANK BRACKETS Manual No. 7006930 MID MOUNT Z-RIDER TP 400-5017-4-NZ-N NZM SERIES 0 & 1...
  • Page 15 REAR FRAME & TANK BRACKETS Item Part No Description 7059083 WELDMENT, Rear Frame 7044846 WELDMENT, Rear Frame 7044816 WELDMENT, Rear Frame 7053476 WELDMENT, Left Hand Fuel Tank Bracket 7053518 WELDMENT, Right Hand Fuel Tank Bracket 7091640 BOLT, 3/8-16 x 1” Square Neck Carriage GR5 7091299 NUT, 3/8-16 Hex Nyloc 7090122...

  • Page 16: Fuel Tank Assembly

    FUEL TANK ASSEMBLY Manual No. 7006930 MID MOUNT Z-RIDER TP 400-5017-4-NZ-N NZM SERIES 0 & 1...

  • Page 17: Fuel Tank Assembly

    FUEL TANK ASSEMBLY Item Part No Description 7053476 WELDMENT, Left Hand Fuel Tank Bracket 7053518 WELDMENT, Right Hand Fuel Tank Bracket 7091640 BOLT, 3/8-16 x 1” Square Neck Carriage GR5 7091299 NUT, 3/8-16 Hex Nyloc 7090122 WASHER, 3/8” Flat 7074566 ASSEMBLY, Fuel Tank, Left Hand 7074565 ASSEMBLY, Fuel Tank, Right Hand...

  • Page 18: Muffler Guard Assembly

    MUFFLER GUARD ASSEMBLY Manual No. 7006930 MID MOUNT Z-RIDER TP 400-5017-4-NZ-N NZM SERIES 0 & 1...

  • Page 19: Muffler Guard Assembly

    MUFFLER GUARD ASSEMBLY Item Part No Description 7074691 UPPER BRACKET, Muffler Guard 7074692 MOUNT, Lower Muffler Guard 7074693 GUARD, Muffler (Back Plate) 7074785 REAR BRACE, Muffler Guard 7075073 GUARD, Muffler 7091299 NUT, 3/8-16 Nyloc 7091640 BOLT, 3/8-16 x 1” Square Neck Carriage GR5 7091923 BOLT, 3/8-16 x 3/4”...

  • Page 20: Twin Stick Control Assembly Pt.1

    TWIN STICK CONTROL ASSEMBLY PT.1 Manual No. 7006930 MID MOUNT Z-RIDER TP 400-5017-4-NZ-N NZM SERIES 0 & 1...
  • Page 21 TWIN STICK CONTROL ASSEMBLY PT.1 Item Part No Description 7074671 LIMITER BRACKET, Right Hand Outside 7090361 SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap 7074670 LIMITER BRACKET, Rear 7074669 LIMITER BRACKET, Right Hand 7059101 WELDMENT, Mounting Hub 7091305 SCREW, 3/8-16 x 2” Hex Head Cap GR5 7091299 NUT, 3/8-16 Hex Nyloc 7079577...
  • Page 22 TWIN STICK CONTROL ASSEMBLY PT.1 Manual No. 7006930 MID MOUNT Z-RIDER TP 400-5017-4-NZ-N NZM SERIES 0 & 1...
  • Page 23 TWIN STICK CONTROL ASSEMBLY PT.1 Item Part No Description 7075029 SPACER, .498 O.D. x 1.010” long 7091841 SCREW, 5/16-18 x 1” Hex Washer Self-Tap 7091814 SCREW, 1/4-20 x 1-1/4” Hex Head Cap 7090372 NUT, 1/4-20 Hex Center Lock Footnotes: MID MOUNT Z-RIDER NZM SERIES 0 &...

  • Page 24: Twin Stick Control Assembly Pt.2

    TWIN STICK CONTROL ASSEMBLY PT.2 Manual No. 7006930 MID MOUNT Z-RIDER TP 400-5017-4-NZ-N NZM SERIES 0 & 1...
  • Page 25 TWIN STICK CONTROL ASSEMBLY PT.2 Item Part No Description 7074671 LIMITER BRACKET, Right Hand Outside 7090361 SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap 7074670 LIMITER BRACKET, Rear 7075026 SPACER 7059101 WELDMENT, Mounting Hub 7091305 SCREW, 3/8-16 x 2” Hex Head Cap GR5 7091299 NUT, 3/8-16 Hex Nyloc 7079577...
  • Page 26 TWIN STICK CONTROL ASSEMBLY PT.2 Manual No. 7006930 MID MOUNT Z-RIDER TP 400-5017-4-NZ-N NZM SERIES 0 & 1...
  • Page 27 TWIN STICK CONTROL ASSEMBLY PT.2 Item Part No Description 7092010 SCREW, 1/4-20 Shoulder Socket Head 7075029 SPACER, .498 O.D. x 1.010” long 7091841 SCREW, 5/16-18 x 1” Hex Washer Self-Tap 7091814 SCREW, 1/4-20 x 1-1/4” Hex Head Cap 7090372 NUT, 1/4-20 Hex Center Lock Footnotes: MID MOUNT Z-RIDER NZM SERIES 0 &...

  • Page 28: Parking Brake Assembly

    PARKING BRAKE ASSEMBLY Manual No. 7006930 MID MOUNT Z-RIDER TP 400-5017-4-NZ-N NZM SERIES 0 & 1...
  • Page 29 PARKING BRAKE ASSEMBLY Item Part No Description 7010739 RING, 5/8” External Retaining 7092091 GROOVE PIN, 1/4 x 1-1/4” 7091593 PIN, 3/8” Self Locking Cotter 7024586 SWIVEL, Brake Link-PM 7046451 SWIVEL, Adjustable 7046782 SPRING, Rectangular Wire Die, Blue 7059084 WELDMENT, Brake Rod Crossrod 7059085 WELDMENT, Park Brake Handle 7059086...

  • Page 30: Hydro Pump Assemblies

    HYDRO PUMP ASSEMBLIES Manual No. 7006930 MID MOUNT Z-RIDER TP 400-5017-4-NZ-N NZM SERIES 0 & 1...
  • Page 31 HYDRO PUMP ASSEMBLIES Item Part No Description 7075709 PUMP, Hydro-Gear (BDP-10A-314) Left Hand 7075709 PUMP, Hydro-Gear (BDP-10A-331) Left Hand 7075710 PUMP, Hydro-Gear (BDP-10A-424) Right Hand 7075710 PUMP, Hydro-Gear (BDP-10A-454) Right Hand 7059089 PULLEY, Hydro Drive Pump 7075624 PULLEY, Hydro Drive Pump 7027199 KEY, M5 x M20 7091829...

  • Page 32: Hydro Pump Linkage

    HYDRO PUMP LINKAGE Manual No. 7006930 MID MOUNT Z-RIDER TP 400-5017-4-NZ-N NZM SERIES 0 & 1...
  • Page 33 HYDRO PUMP LINKAGE Item Part No Description ASSY, Pump Control Linkage (Incl. indented items below) 7073995 LINKAGE ROD, Pump Control (5/16-24 thread- both ends) 7091297 NUT, 5/16-24 Hex GR5 (2 per assembly) 7027139 LINKAGE (2 per assembly) 7091527 SCREW, 5/16-18 x 1-1/4” Hex Head Cap GR5 7090188 WASHER, 5/16”...

  • Page 34: Hose Assembly (Series 0) Pt.1

    HOSE ASSEMBLY (Series 0) PT.1 Manual No. 7006930 MID MOUNT Z-RIDER TP 400-5017-4-NZ-N NZM SERIES 0 & 1...
  • Page 35 HOSE ASSEMBLY (Series 0) PT.1 Item Part No Description 7059112 MOUNT, Oil Filter 7027200 FITTING, Straight 1-12 UNF Thread 7027164 FILTER, Oil 7090815 SCREW, 3/8-16 x 3/4” Hex Washer Self-Tap 7074161 MOTOR, Hydraulic 7092087 BOLT, 1/2-13 x 6” Hex Head Cap GR5 7091322 WASHER, 1/2”...

  • Page 36: Hose Assembly (Series 0) Pt.2

    HOSE ASSEMBLY (Series 0) PT.2 Manual No. 7006930 MID MOUNT Z-RIDER TP 400-5017-4-NZ-N NZM SERIES 0 & 1...
  • Page 37 HOSE ASSEMBLY (Series 0) PT.2 Item Part No Description 7075445 MOUNT, Oil Filter 7075060 CONNECTOR, 90 Degree Hydraulic (Parker # 8 C5OLO-S) 7075052 HOSE, 18-1/2” (Parker R836BKJCJ9090808-18.5) 7075053 HOSE, 12-1/4” (Parker # R836BKJ9NR080008-12.5) Footnotes: MID MOUNT Z-RIDER NZM SERIES 0 & 1 Note also shown in previous group Manual No.

  • Page 38: Hose Assembly (48" & 52" Deck, Series 1) Pt.1

    HOSE ASSEMBLY (48" & 52" DECK, SERIES 1) PT.1 Manual No. 7006930 MID MOUNT Z-RIDER TP 400-5017-4-NZ-N NZM SERIES 0 & 1...
  • Page 39 HOSE ASSEMBLY (48" & 52" DECK, SERIES 1) PT.1 Item Part No Description 7059112 MOUNT, Oil Filter 7027200 FITTING, Straight 1-12 UNF Thread 7027164 FILTER, Oil 7090815 SCREW, 3/8-16 x 3/4” Hex Washer Self-Tap 7075637 MOTOR, Hydraulic, Left Hand 7075638 MOTOR, Hydraulic, Right Hand 7092087 BOLT, 1/2-13 x 6”...

  • Page 40: Hose Assembly (48" & 52" Deck, Series 1) Pt.2

    HOSE ASSEMBLY (48" & 52" DECK, SERIES 1) PT.2 Manual No. 7006930 MID MOUNT Z-RIDER TP 400-5017-4-NZ-N NZM SERIES 0 & 1...
  • Page 41 HOSE ASSEMBLY (48" & 52" DECK, SERIES 1) PT.2 Item Part No Description 7075445 MOUNT, Oil Filter 7075060 CONNECTOR, 90 Degree Hydraulic (Parker # 8 C5OLO-S) 7075052 HOSE, 18-1/2” (Parker R836BKJCJ9090808-18.5) 7075053 HOSE, 12-1/4” (Parker # R836BKJ9NR080008-12.5) Footnotes: MID MOUNT Z-RIDER NZM SERIES 0 &...

  • Page 42: Hose Assembly (61" Deck, Series 1) Pt.1

    HOSE ASSEMBLY (61" DECK, SERIES 1) PT.1 Manual No. 7006930 MID MOUNT Z-RIDER TP 400-5017-4-NZ-N NZM SERIES 0 & 1...
  • Page 43 HOSE ASSEMBLY (61" DECK, SERIES 1) PT.1 Item Part No Description 7059112 MOUNT, Oil Filter 7027200 FITTING, Straight 1-12 UNF Thread 7027164 FILTER, Oil 7090815 SCREW, 3/8-16 x 3/4” Hex Washer Self-Tap 7075637 MOTOR, Hydraulic, Left Hand 7075638 MOTOR, Hydraulic, Right Hand 7092087 BOLT, 1/2-13 x 6”...

  • Page 44: Hose Assembly (61" Deck, Series 1) Pt.2

    HOSE ASSEMBLY (61" DECK, SERIES 1) PT.2 Manual No. 7006930 MID MOUNT Z-RIDER TP 400-5017-4-NZ-N NZM SERIES 0 & 1...
  • Page 45 HOSE ASSEMBLY (61" DECK, SERIES 1) PT.2 Item Part No Description 7075445 MOUNT, Oil Filter 7075060 CONNECTOR, 90 Degree Hydraulic (Parker # 8 C5OLO-S) 7075052 HOSE, 18-1/2” (Parker R836BKJCJ9090808-18.5) 7075053 HOSE, 12-1/4” (Parker # R836BKJ9NR080008-12.5) Footnotes: MID MOUNT Z-RIDER NZM SERIES 0 & 1 Note also shown in previous group Manual No.

  • Page 46: Hydro Reservoir Assembly

    HYDRO RESERVOIR ASSEMBLY Manual No. 7006930 MID MOUNT Z-RIDER TP 400-5017-4-NZ-N NZM SERIES 0 & 1...
  • Page 47 HYDRO RESERVOIR ASSEMBLY Item Part No Description 7059088 ASSY, Hydraulic Tank (Incl. tank, p/n 74002 and indented items below) 7075289 CAP, Vented (Kelck p/n H4550D) 7075687 GROMMET (was 12337) 7073238 FITTING, #8 Elbox 7073999 BRACKET, R.H. Hydro Tank Mount 7074001 BRACKET, L.H.

  • Page 48: Hydro Idler Assembly

    HYDRO IDLER ASSEMBLY Manual No. 7006930 MID MOUNT Z-RIDER TP 400-5017-4-NZ-N NZM SERIES 0 & 1...
  • Page 49 HYDRO IDLER ASSEMBLY Item Part No Description 7014669 FITTING, 3/16” Straight Lube 7014409 BUSHING, 9/16” I.D. 7035816 PIN, Idler Arm (3/8-24 Thread) 7018574 PULLEY, Flat Idler 4.12” (Backside Idler) 7059094 WELDMENT, Idler Arm 7073992 SPRING, Extension 7075109 BELT, Hydro Drive (HA Section, 47.5 Effective Length) 7075109 BELT, Hydro Drive (5L Section, 47.5 Effective Length) 7091585...

  • Page 50: Seat Assembly (Series 0

    SEAT ASSEMBLY (SERIES 0) Manual No. 7006930 MID MOUNT Z-RIDER TP 400-5017-4-NZ-N NZM SERIES 0 & 1...
  • Page 51 SEAT ASSEMBLY (SERIES 0) Item Part No Description 7074771 SEAT ASSY (Milsco p/n S673074AB; order parts from 414-410- 3942) 7074218 SPRING, Compression- Seat Support 7074328 COVER, Seat Support Spring 7090122 WASHER, 3/8” Flat 7091299 NUT, 3/8-16 Nyloc 7074674 SEAT PAN 7074673 CROSSMEMBER, Seat 7074675...

  • Page 52: Seat Assembly (Series 1

    SEAT ASSEMBLY (SERIES 1) Manual No. 7006930 MID MOUNT Z-RIDER TP 400-5017-4-NZ-N NZM SERIES 0 & 1...
  • Page 53 SEAT ASSEMBLY (SERIES 1) Item Part No Description 7075417 SEAT ASSY(Ferris p/n 177516 order parts from Seats, Inc. 1- 800-767-3287) 7029338 SEAT ASSY (Seats Inc. p/n 179035VD310 Silver/Black (not shown) 7074218 SPRING, Compression- Seat Support 7091541 SCREW, 5/16-18 x 3/4” Hex Washer Self-Tap 7090122 WASHER, 3/8”...

  • Page 54: Engine Sub-Assembly

    ENGINE SUB-ASSEMBLY Manual No. 7006930 MID MOUNT Z-RIDER TP 400-5017-4-NZ-N NZM SERIES 0 & 1...
  • Page 55 ENGINE SUB-ASSEMBLY Item Part No Description ENGINE, 19 HP Kawasaki (Model FH601V-BS20) ENGINE, 21 HP Kawasaki (Model FH641V-BS01 or AS17) ENGINE, 25 HP Kawasaki (Model FH721V-AS29) ENGINE, 27 HP Kohler (Model CV740S) 7091540 SCREW, 5/16-18 x 1-1/2” Hex Head Cap GR5 7013847 RETAINER, 3/8”...

  • Page 56: Control Panel Assembly

    CONTROL PANEL ASSEMBLY Manual No. 7006930 MID MOUNT Z-RIDER TP 400-5017-4-NZ-N NZM SERIES 0 & 1...

  • Page 57: Control Panel Assembly

    CONTROL PANEL ASSEMBLY Item Part No Description 7074676 CONTROL PANEL 7074801 CONTROL LEVER, Throttle/Choke 7074804 CONTROL CABLE, Throttle 7075086 STRAP, Tether 7075046 CONTROL CABLE, Choke 7090361 SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap 7091240 SCREW, #10-32 x 5/8” Hex Washer Self-Tap 7090376 NUT, #10-32 Nyloc 7075132...

  • Page 58: Cutting Deck Assembly Pt.1

    48" CUTTING DECK ASSEMBLY PT.1 Manual No. 7006930 MID MOUNT Z-RIDER TP 400-5017-4-NZ-N NZM SERIES 0 & 1...
  • Page 59 48" CUTTING DECK ASSEMBLY PT.1 Item Part No Description 7059475 WELDMENT, 48” Deck 7091305 SCREW, 3/8-16 x 2” Hex Head Cap, GR5 7027327 WELDMENT Pivot Pin 7091304 SCREW, 3/8-16 x 1” Hex Head Cap, GR5 7091299 NUT, 3/8-16 Hex Nyloc 7073142 ROLLER Low Density Polyethylene 7027344...

  • Page 60: Cutting Deck Assembly Pt.2

    48" CUTTING DECK ASSEMBLY PT.2 Manual No. 7006930 MID MOUNT Z-RIDER TP 400-5017-4-NZ-N NZM SERIES 0 & 1...
  • Page 61 48" CUTTING DECK ASSEMBLY PT.2 Item Part No Description 7091304 SCREW, 3/8-16 x 1” Hex Head Cap, GR5 7091299 NUT, 3/8-16 Hex Nyloc 7075083 BELT, Primary (HB Section, 91.30” effective length) ASSEMBLY, Idler (see breakdown on Idler Assy page) ASSEMBLY, Center Spindle (see breakdown on Deck Spindle Assy page) ASSEMBLY, Spindle (see breakdown on Deck Spindle Assy page)

  • Page 62: Cutting Deck Assembly Pt.1

    52" CUTTING DECK ASSEMBLY PT.1 Manual No. 7006930 MID MOUNT Z-RIDER TP 400-5017-4-NZ-N NZM SERIES 0 & 1...
  • Page 63 52" CUTTING DECK ASSEMBLY PT.1 Item Part No Description 7059374 WELDMENT, 52” Deck 7091305 SCREW, 3/8-16 x 2” Hex Head Cap, GR5 7027327 WELDMENT Pivot Pin 7091304 SCREW, 3/8-16 x 1” Hex Head Cap, GR5 7091299 NUT, 3/8-16 Hex Nyloc 7073142 ROLLER Low Density Polyethylene 7027344...

  • Page 64: Cutting Deck Assembly Pt.2

    52" CUTTING DECK ASSEMBLY PT.2 Manual No. 7006930 MID MOUNT Z-RIDER TP 400-5017-4-NZ-N NZM SERIES 0 & 1...
  • Page 65 52" CUTTING DECK ASSEMBLY PT.2 Item Part No Description 7091304 SCREW, 3/8-16 x 1” Hex Head Cap, GR5 7091299 NUT, 3/8-16 Hex Nyloc ASSEMBLY, Idler (see breakdown on Idler Assy page) ASSEMBLY, Center Spindle (see breakdown on Deck Spindle Assy page) ASSEMBLY, Spindle (see breakdown on Deck Spindle Assy page) 7075083...

  • Page 66: Cutting Deck Assembly Pt.1

    61" CUTTING DECK ASSEMBLY PT.1 Manual No. 7006930 MID MOUNT Z-RIDER TP 400-5017-4-NZ-N NZM SERIES 0 & 1...
  • Page 67 61" CUTTING DECK ASSEMBLY PT.1 Item Part No Description 7044815 WELDMENT, 61” Deck 7091305 SCREW, 3/8-16 x 2” Hex Head Cap, GR5 7027327 WELDMENT Pivot Pin 7091304 SCREW, 3/8-16 x 1” Hex Head Cap, GR5 7091299 NUT, 3/8-16 Hex Nyloc 7073142 ROLLER Low Density Polyethylene 7027344...

  • Page 68: Cutting Deck Assembly Pt.2

    61" CUTTING DECK ASSEMBLY PT.2 Manual No. 7006930 MID MOUNT Z-RIDER TP 400-5017-4-NZ-N NZM SERIES 0 & 1...
  • Page 69 61" CUTTING DECK ASSEMBLY PT.2 Item Part No Description 7091304 SCREW, 3/8-16 x 1” Hex Head Cap, GR5 7091299 NUT, 3/8-16 Hex Nyloc ASSEMBLY, Idler (see breakdown on Idler Assy page) ASSEMBLY, Center Spindle (see breakdown on Deck Spindle Assy page) ASSEMBLY, Spindle (see breakdown on Deck Spindle Assy page) 7071766...

  • Page 70: Idler Assemblies (58885

    IDLER ASSEMBLIES (58885) Manual No. 7006930 MID MOUNT Z-RIDER TP 400-5017-4-NZ-N NZM SERIES 0 & 1...
  • Page 71 IDLER ASSEMBLIES (58885) Item Part No Description 7058147 WELDMENT, Idler Plate ASSEMBLY, Primary Idler ASSEMBLY, Secondary Idler 7023747 BUSHING, 1” Machine 7012709 RING, 1” External Retaining 7074720 BUSHING, Idler PM 7014669 LUBE FITTING, 3/16” 7090517 WASHER, 3/8” Flat 7091585 NUT, 3/8-16 Hex Center Lock, GR5 or B 7027220 SCREW, 3/8-16 x 3-1/4”...

  • Page 72: Deck Spindle Assemblies

    DECK SPINDLE ASSEMBLIES Manual No. 7006930 MID MOUNT Z-RIDER TP 400-5017-4-NZ-N NZM SERIES 0 & 1...

  • Page 73: Deck Spindle Assemblies

    DECK SPINDLE ASSEMBLIES Item Part No Description 7054011 SUB-ASSEMBLY, Spindle (Includes indented items below) 7029254 SPACER, Bearing 7029274 RING, Spindle Retaining 7029384 VENT, Spindle (Alemite # 321839) 7029422 BALL BEARING (2 per item 1, sub-assembly) 7058237 HOUSING, Spindle 7029302 BOLT, Ribbed (3/8-16 x 1-1/4” Thread) (6 per item 1, sub- assembly) 7076998 FITTING, Lube (1/4-28 Thread;...

  • Page 74: Decals

    DECALS Manual No. 7006930 MID MOUNT Z-RIDER TP 400-5017-4-NZ-N NZM SERIES 0 & 1...
  • Page 75 DECALS Item Part No Description 7075039 DECAL,Motion Control Lever 7035846 DECAL, Fuse 7044792 DECAL, 48” Deck (Series 0) 7075565 DECAL, 48” Deck (Series 1) 7044793 DECAL, 52” Deck (Series 0) 7075566 DECAL, 52” Deck (silver) (Series 1) 7075567 DECAL, 61” Deck (silver) 7013010 DECAL, Warning (CPSC Cut-Finger) 7075756...

  • Page 76: Decals (Continued

    DECALS (continued) Manual No. 7006930 MID MOUNT Z-RIDER TP 400-5017-4-NZ-N NZM SERIES 0 & 1...
  • Page 77 7075296 DECAL, Caution (Spring Mechanism) 7073596 DECAL, Warning 7027733 DECAL, Ear Protection 7045108 DECAL, Tank Selector 7071916 DECAL, SNAPPER (14.56” long) 7075760 DECAL, SNAPPER (8.0” long) 7029470 DECAL, Patent Numbers 7075433 DECAL, Oil Reservoir Overfill Warning 7075747 DECAL, Detent Footnotes: MID MOUNT Z-RIDER NZM SERIES 0 &...

  • Page 78: Electrical Components (Except Wiring) Pt.1

    ELECTRICAL COMPONENTS (except wiring) PT.1 Manual No. 7006930 MID MOUNT Z-RIDER TP 400-5017-4-NZ-N NZM SERIES 0 & 1...
  • Page 79 ELECTRICAL COMPONENTS (except wiring) PT.1 Item Part No Description 7072684 SWITCH, Ignition 7075622 SOLENOID, Super Trombetta 7073406 KEY SET (not shown) 7029211 SWITCH, Seat, NC 7023354 SWITCH, Seat, NC 7091603 NUT, 1/4-20 Hex Nyloc 7090741 SCREW, 1/4-20 x 5/8” Hex Head w/loose captured washer 7075132 SWITCH, PTO, Yellow 7074796...

  • Page 80: Electrical Components (Except Wiring) Pt.2

    ELECTRICAL COMPONENTS (except wiring) PT.2 Manual No. 7006930 MID MOUNT Z-RIDER TP 400-5017-4-NZ-N NZM SERIES 0 & 1...
  • Page 81 ELECTRICAL COMPONENTS (except wiring) PT.2 Item Part No Description 7022886 SWITCH, DP NO/NC Snap-In Footnotes: MID MOUNT Z-RIDER NZM SERIES 0 & 1 Note *=Normally Open **=Normally Closed Manual No. 7006930 TP 400-5017-4-NZ-N...

  • Page 82: Wiring Harness (Kawasaki Engines

    WIRING HARNESS (Kawasaki engines) Manual No. 7006930 MID MOUNT Z-RIDER TP 400-5017-4-NZ-N NZM SERIES 0 & 1...
  • Page 83 WIRING HARNESS (Kawasaki engines) Item Part No Description 7074795 HARNESS, Wiring 7075038 CABLE, Battery- Positive (6 Gage, 34” long) 7035609 CABLE, Battery- Ground (6 Gage/14 Gage, 23” long) 7075602 CABLE, Solenoid to Starter (6 Gage, 10” long) 7075091 WIRE, Solenoid- Ground (10 Gage, 6-1/2” long) Footnotes: MID MOUNT Z-RIDER NZM SERIES 0 &...

  • Page 84: Wiring Harness (Kohler Engines

    WIRING HARNESS (Kohler Engines) Manual No. 7006930 MID MOUNT Z-RIDER TP 400-5017-4-NZ-N NZM SERIES 0 & 1...
  • Page 85 WIRING HARNESS (Kohler Engines) Item Part No Description 7029337 HARNESS, Wiring, Kohler/Twin 7075038 CABLE, Battery- Positive (6 Gage, 34” long) 7035609 CABLE, Battery- Ground (6 Gage/14 Gage, 23” long) Footnotes: MID MOUNT Z-RIDER NZM SERIES 0 & 1 Note not shown not shown Manual No.

  • Page 86: Wiring Schematic (Kawasaki Engines

    WIRING SCHEMATIC (Kawasaki engines) Manual No. 7006930 MID MOUNT Z-RIDER TP 400-5017-4-NZ-N NZM SERIES 0 & 1...
  • Page 87 WIRING SCHEMATIC (Kawasaki engines) Item Part No Description 7074795 HARNESS, Wiring Footnotes: MID MOUNT Z-RIDER NZM SERIES 0 & 1 Note Manual No. 7006930 TP 400-5017-4-NZ-N...

  • Page 88: Wiring Schematic (Kohler Engines

    WIRING SCHEMATIC (Kohler Engines) Manual No. 7006930 MID MOUNT Z-RIDER TP 400-5017-4-NZ-N NZM SERIES 0 & 1...
  • Page 89 WIRING SCHEMATIC (Kohler Engines) Item Part No Description 7029337 HARNESS, Wiring, Kohler/Twin Footnotes: MID MOUNT Z-RIDER NZM SERIES 0 & 1 Note Manual No. 7006930 TP 400-5017-4-NZ-N...
  • Page 92 MID MOUNT Z-RIDER ZERO TURNING HYDRO DRIVE NZM SERIES 0 & 1 IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO. WE RESERVE THE RIGHT TO MAKE CHANGES OR ADD IMPROVEMENTS AT ANY TIME WITHOUT INCURRING ANY OBLIGATION TO MAKE SUCH CHANGES ON PRODUCTS MANUFACTURED PREVIOUSLY.

This manual is also suitable for:

Nzm21520kwvNzm19481kwvNzm21521kwvNzm25611kwvNzm27611kh

Table of Contents

Save PDF