LG T2735NTWV Owner's Manual page 31

Symptoms
Washing machine
will not operate
Reason
Control panel has powered off
due to inactivity.
Washing machine is unplugged.
Water supply is turned off.
Controls are not set properly.
Door or drawer is open.
Circuit breaker/fuse is tripped/
blown.
Control needs to be reset.
Start/Pause was not pressed
after a cycle was set.
Extremely low water pressure.
Washing machine is too cold.
Solution
• This is normal. Press the Power button to
turn the washing machine on.
• Make sure cord is plugged securely into a
working outlet.
• Turn both hot and cold taps fully on.
• Make sure the cycle was set correctly, close
the door and press the Start/Pause button.
• Close the door and drawer make sure that
nothing is caught under the door preventing
it from closing completely.
• Check house circuit breakers/fuses. Replace
fuses or reset breaker. The washing machine
should be on a dedicated branch circuit.
The washing machine will resume the cycle
where it stopped once power is restored.
• Press the Power button, then re-select the
desired programme and press the Start/
Pause button.
• Press the Power button then re-select the
desired programme and press the Start/
Pause button. The washing machine will
shut off if the Start/Pause button is not
pressed within 4 minutes.
• Check another tap in the house to make
sure that household water pressure is
adequate.
• If the washing machine has been exposed to
temperatures below freezing for an extended
period of time, allow it to warm up before
pressing the Power button.
EN
31