Connection
C-mount lens
Power supply
You can supply power to the camera module using the following methods.
Using the RJ45 connector
This unit supports PoE (IEEE802.3af standard). By using a PoE-compatible LAN cable and camera module interface board or hub,
you can power, control, and output images from the camera using one LAN cable.
Using the DC IN connector
You can supply power via the DC IN connector using the power adapter.
Use DC-700/700CE which is the stable power source free from ripple or noise.
Heat dissipation
For heat dissipation, refer to When mounting the camera (see page 9).
LAN cable
Camera module
Camera cable
Tripod adaptor
VCT-333I
If the HUB supports PoE, the items within the dashed line are not necessary.
Camera module interface board
Camera adaptor
DC-700/700CE
6
AC
TRIG