8700 Slc Manual Pull Stations; 8700 Slc Detectors; 8700 Slc Modules; 8700 Slc Bases - Siemens FC901-U3 Installation, Operation And Maintenance Manual

8700 SLC Manual Pull Stations

Siemens
Cat. No.
8700-S Manual Station, Single Action
8700-D Manual Station, Double Action
8700M Metal Manual Station, Single Action

8700 SLC Detectors

Siemens
Cat. No.
8710 Photo Detector
8712 Thermal Detector, Fixed or Fixed/Rate of Rise
8713 Photo/Thermal Detector

8700 SLC Modules

Siemens
Cat. No.
8702 Single input interface module
8703 Dual input interface module
8704 Single input interface module with relay
8701 Mini single input interface module
8706 Intelligent control point
8705 Conventional zone module
8709 Line isolator

8700 SLC Bases

Siemens
Cat. No.
8853 Detector Base
8715 Detector Audible Base
8716 Relay Base

8700 SLC Accessories

Siemens
Cat. No.
8726C Intelligent Remote Lamp, Ceiling mount
8726W Intelligent Remote Lamp, Wall mount
8727C Remote Lamp, Ceiling mount
8727W Remote Lamp, Wall mount
8741 Air Duct Housing with Relay
8743 Air Duct Housing
Notes:
1. Siemens SLC devices, detectors and modules, up to a maximum of 50 addresses may be used.
2. For specific wiring and installation information, read the instructions provided with each device.
3. If more than one HCP is used on a SLC device loop, the loop must be wired Class A or the riser conductors must be installed in
accordance with the Survivability From Attack By Fire requirements in the National Fire Alarm Code, NFPA 72. If wired Class A, at least
one HLIM loop isolator must be installed between each HCP and between the panel and the first and last HCP. See the HLIM installation
instructions for the maximum number of isolators allowed per loop and other wiring instructions.

FD182UL

Point detectors
OP921 Smoke detector
OH921 Smoke heat detector
HI921 Heat detector
Description
Description
Description
Description
Description
Description
53