Configuring The Adapter; Using The Configuration Utility - ActionTec 802EAG User Manual

Configuring
the Adapter
This chapter explains how to configure the Adapter, including changing the
address, setting up security, and creating a password. The Adapter can be config-
ured through the Configuration Utility provided on the Utility
puter), or through an internet browser via the Web Configurator.

Using the Configuration Utility

The Configuration Utility allows the user to view or modify various settings of the
Adapter, including configuring security, changing the
link status.
Installing the Utility
To install the Configuration Utility
1. Insert the Adapter's Utility CD in the
2. The installation should start automatically. If not, from the computer's desk-
top, click Start, then select Run. Type
letter of the computer's
3. When the following screen appears, click Finish.
The Configuration Utility is installed on the computer and ready to use.
CD-ROM
d:\C123.exe
drive). Click OK.
CD-ROM
11
(using a com-
CD
address, and checking the
IP
drive of a computer.
(where "d" is the drive
4
IP