The System - Philips CD450 User Manual

The System

REGISTERING ADDITIONAL HANDSET(S)
Registration allows communication between your base unit and handset(s). If
your handset is not registered, you will not be able to make a call or use some of
the functions and features on the phone.
1. Press on the base unit for 3 seconds.
2. Press on the handset.
3. Select Advanced set Advanced set Advanced set Advanced set
4. Enter the system PIN (Pre-set: 0000). Use
corrections.
OK
5. Press . Your handset starts searching for the base.
Registration shall be completed within 60 seconds. The base
automatically assigns a handset number to the handset.
NOTE: Your base can register up to 5 handsets. After registering 5
handsets, your base unit registration memory is full. If you attempt to
register an additional handset, registration will not be successful.
DELETING A HANDSET
Use one handset to de-register another handset that shares the same base unit.
1. Press .
2. Select A A A A dvanced set dvanced set
dvanced set dvanced set
3. Enter the system PIN. Use
OK
4. Press . Select the handset (number) you want to delete.
TIP: Handset Number
Handset Number. The handset number displays beside the Handset Number Handset Number
handset name during standby.
OK
5. Press . The handset is deleted.
OK
Registration Regist Regist Regist ration ration ration. Press .
BACK
to make
OK
U U U U nregister nregister. Press .
nregister nregister
BACK
to make corrections.
- 45 -
The System
CHANGING YOUR PIN
The system PIN is used for registration and protecting access rights to some of
the menus and remote access to the ANSWERING MACHINE. The pre-set PIN is
0000. You can personalize your PIN for greater security.
1. Press .
2. Select A A A A dvanced set dvanced set
dvanced set dvanced set
3. Enter the system PIN. Use
OK
4. Press to confirm the system PIN.
5. Enter the new system PIN. Press
6. Enter the new system PIN again for verification. Press
setting is saved.
NOTE: Forgotten PIN
Forgotten PIN Forgotten PIN. Write down your PIN and save it for future use. If Forgotten PIN
you have forgotten the PIN, reset your phone and your PIN code will be
restored to the factory pre-set PIN (0000). To reset your phone, see
Restoring default settings on page 47.
CHANGING THE COUNTRY SETTING
This feature only applies This feature only applies to model(s) with multiple to model(s) with multiple- - - - country support.
This feature This feature only applies only applies to model(s) with multiple to model(s) with multiple
You can change the country setting of your phone when you are using it in
another country. If your handset displays W W W W elcome
"Welcome" on page 14.
1. Press .
2. Select A A A A dvanced set dvanced set
dvanced set dvanced set
3. Select the new setting. Press
OK
Change PIN. Press Change PIN .
Change PIN Change PIN
BACK
to make corrections.
OK
.
OK
. The
country support.
country support. country support.
elcome elcome, refer to Greeting you with elcome
OK
C C C C ountry ountry. Press .
ountry ountry
OK
. The setting is saved.
- 46 -