Frigidaire CHEST FREEZER Manual page 10

Table of Contents

Advertisement

Before You Call
PROBLEM
SOUND AND NOISE
Louder sound levels when-
ever appliance is on.
Louder sound levels when
compressor comes on.
Popping or cracking sound
when compressor comes on.
Bubbling or gurgling sound.
Vibrating or rattling noise.
WATER/MOISTURE/FROST INSIDE APPLIANCE
Moisture forms on inside
appliance walls.
ODOR IN APPLIANCE
Odors in appliance.
DOOR PROBLEMS
Door will not close.
LIGHTING PROBLEMS
Light bulb is not on.
CAUSE
• Modern appliances have
increased storage capacity
and more stable tempera-
tures. They require heavy-
duty compressors.
• Appliance operates at
higher pressures during
the start of the ON cycle.
• Metal parts undergo expan-
sion and contraction, as in
hot water pipes.
• Refrigerant (used to cool
appliance) is circulating
throughout the system.
• Appliance is not level. It
rocks on the floor when it
is moved slightly.
• Floor is uneven or weak.
• Appliance is touching
the wall.
• Weather is hot and humid,
which increases internal
rate of frost build-up.
• Interior needs to be cleaned.
• Food with strong odors are
in the appliance.
• Appliance is not level. It
rocks on the floor when it
is moved slightly.
• Floor is uneven or weak.
• The fluorescent lamp or
light bulb is burned out.
• No electric current is
reaching the appliance.
10
CORRECTION
• This is normal. When the
surrounding noise level is low,
you may hear the compressor
running while it cools
the interior.
• This is normal. Sound will
level off or disappear as appli-
ance continues to run.
• This is normal. Sound will
level off or disappear as appli-
ance continues to run.
• This is normal.
• Level the appliance by putting
wood or metal shims under
part of the appliance.
• Ensure floor can adequately
support appliance. Level
the appliance.
• Re-level appliance or move
appliance slightly.
• This is normal.
• Clean interior with sponge,
warm water, and baking soda.
• Cover the food tightly.
• Level the appliance by putting
wood or metal shims under
part of the appliance.
• Ensure floor can adequately
support appliance. Level the
appliance by putting wood or
metal shims under part of
the appliance.
• See "Fluorescent Lamp"
or "Interior Light" in Fea-
tures section.
• See "Appliance does not run".

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents