Odorfree Charcoal Filter - Miele PUR 98 D Operating And Installation Instructions

Cleaning and care
 In a Miele dishwasher use the
"Normal" program.
Depending on the detergent used,
cleaning the filters in a dishwasher
may cause the inside filter surfaces to
become discolored. However, this will
not affect the functioning of the grease
filters in any way.
After cleaning
 After cleaning, leave the filters on an
absorbent surface to dry.
 When removing the filters for
cleaning, also clean off any
accessible oil or fat buildup from the
housing. Doing so will prevent a fire
hazard.
 Reinstall the grease filters. When
inserting the filters, make sure that
the locking clip is facing down.
 If the filters have been installed
incorrectly, you can insert a small
screwdriver into the slit to disengage
the locking clip.
20

OdorFree Charcoal Filter

If the hood is equipped for recirculation,
an OdorFree Charcoal Filter must be
installed in addition to the grease filters.
This filter is designed to absorb odor-
causing agents and is mounted in the
canopy above the grease filters.
Charcoal filters are available to order via
the Miele Webstore, Miele Service (see
end of this booklet for contact details)
or directly from Miele.
How to install/replace a charcoal
filter
 Remove the grease filters before
fitting or replacing a charcoal filter.
 Take the charcoal filter out of its
packaging.
 Press the charcoal filter into the
frame.
 Reinsert the grease filters.