Turning Power Management On/Off; Safety Shut-Off - Miele PUR 98 D Operating And Installation Instructions

Turning power management on/off

You can deactivate power
management.
Keep in mind that this may increase
energy consumption.
 To set this option, turn off the fan and
the overhead lighting first.
 Press the  and  buttons at the
same time for approx. 10 seconds,
until 1 lights up.
 Then, press the following buttons in
succession:
– the lighting button ,
– followed by the  button and then
– the lighting button .
If power management is turned on, the
1 and B indicators will be continuously
lit.
If it is turned off, the 1 and B indicators
will flash.
 Press the  button to turn power
management off.
The 1 and B indicators will flash.
 To turn it on, press the  button.
The 1 and B indicators will be
continuously lit.
 Confirm your choice with the On/Off
button .
All the indicator lights will go out.
If the new setting is not confirmed
within 4 minutes, the ventilation system
reverts to the previous setting.

Safety shut-off

If power management has been
deactivated, the ventilation hood will
switch itself off automatically after
12 hours if it has been left on (blower
and overhead lighting).
 To switch it back on, press the On/
Off  control or the lighting
control .
Operation
15