Sensor Setup; Calibration Setup - MSA ALTAIR 4XR Operating Manual

The following options are available by pressing the  and  buttons:
• Sensor Setup (SENSOR SETUP)
• Calibration Setup (CAL SETUP)
• Alarm Setup (ALARM SETUP)
• Setup Time and Date (TIME DATE)
• Bluetooth Setup (BT SETUP)
•
EXIT

Sensor Setup

Each sensor can be turned on or off.
For more information, see the flow charts in chapter 7.6 "Sensor Setup".
Fig. 4 Sensor Setup
To bypass this setup, press the  or  button; otherwise, continue as follows.
(1)
(2) Press the q button to enter the submenu.
(3) Use the  or  button to change the option and confirm with the q button.
(4) Repeat this procedure for all other sensors.
(5) After setting the last sensor, continue to Calibration Setup.

Calibration Setup

The user can change and set the calibration values for each sensor.
It is also possible to
• select whether the Cal Due screen is displayed
• set the number of days until the next calibration is due
• select whether the device password screen is displayed to protect Bump and Calibration opera-
tions
For more information, see the flow charts in chapter 7.7 "Calibrations".
®
ALTAIR 4XR
Operation
US
29