Leica Q2 Instruction Manual page 82
Hide thumbs
Also See for Q2:
- Quick start manual ,
- Instruction manual (233 pages) ,
- Instruction manual (164 pages)
Table of Contents
Advertisement
EN
EXPOSURE COMPENSATION
Exposure meters are calibrated for a medium gray scale value,
which matches a standard, i.e. average image object. Should the
measured image detail not fulfill that requirement, then the a
relevant exposure compensation can be effected.
Specifically where several pictures are taken in sequence, for
example if for a series a slightly lesser or greater exposure is
desired for a particular reason, then exposure compensation can
be a very useful function: Once set, the setting remains active
– unlike the metering memory lock – until it is reset.
Exposure compensation can be set in the range ± 3EV in 1⁄3 EV
increments (EV: Exposure Value).
A
Set compensation value (marks at
82
A
= Off)
0
▸
Select
Exposure Compensation
• A scale appears as a submenu item.
▸
Set the value on the scale
• The set value is displayed in the scale
Notes
• This function can be selected for direct access via the thumb-
wheel (see p. 47). That will allow the user to set the values
quickly using the thumbwheel.
• The following applies for set compensation values, no matter
how they were initially set: They remain effective until they are
manually reset to
, i.e. even if the camera is switched off and
0
on again in the meantime.
"
" is a representative placeholder for the relevant value in the positive or
±X
1
negative range.
in the main menu
Advertisement
Table of Contents
