Leica Q2 Instruction Manual page 140
Hide thumbs
Also See for Q2:
- Quick start manual ,
- Instruction manual (233 pages) ,
- Quick start manual (13 pages)
Table of Contents
Advertisement
EN
Pictures/recordings are damaged or missing
Review/playback unavailable
Picture quality
The picture is too bright
Image noise
Unnatural colors
Round white blotches, similar to soap bubbles
Images are out of focus
Images are overexposed
Out of focus/picture stabilizer not functioning
The image is grainy or there is image noise
Horizontal stripes
Unnatural colors and brightness
Picture is too white
No images are displayed
Images cannot be displayed
Video quality
Video recordings show flickering/stripes
Camera noise in video recording
140
The memory card was removed while the readiness
indicator was flashing
The memory card formatting is faulty or the card is
damaged
The camera is connected to Leica FOTOS app
Light sensor was covered while picture was taken
long exposure times (>1 s)
ISO sensitivity set too high
White balance not or incorrectly set
Flash photography in very dark environment: Reflection
of dust particles
Lens is dirty
Lens is obstructed
Camera moved during exposure
Macro Function
Flash is activated in bright surroundings
Exposure at a dark location without flash
ISO sensitivity set too high
Picture was taken with electronic shutter under a light
source like a fluorescent lamp
Picture taken in artificial light or extreme brightness
Strong light source in the image
Picture is too white
Memory card is empty or not inserted
File name of the image was changed on a PC
Light source interference in artificial lighting
The setting dials were used
Never remove the memory card while the readiness
indicator is flashing. Charge the battery.
Reformat the memory card
(Caution: Loss of data!)
Terminate the connection
Make sure that the light sensor is not obstructed
Activate the noise suppression function for long
exposure times
Decrease ISO sensitivity
Adjust white balance to light source or adjust manually
Deactivate the flash
Clean the lens
Make sure that lens is unobstructed
Use flash or mount camera on a tripod
Select the appropriate mode
Change the flash mode
Use a tripod
Decrease ISO sensitivity
Try shorter shutter speeds
Set white balance or select correct lighting presets
Avoid strong light sources in picture composition
(Half) backlight falling into the lens (also from light
sources outside the image range)
use appropriate software for image transfers from a PC
to the camera; available from the Leica AG website
Select a different frame rate (suitable for the local AC
grid frequency) under
Video Resolution
Avoid using the setting dials during video recordings
Advertisement
Table of Contents
