Safety Information; Warnings - Siemens SINAMICS G120P Operating Instructions Manual

Safety information

1.1

Warnings

Danger to life if the fundamental safety instructions and remaining risks are not carefully
observed
Non-compliance with the fundamental safety instructions and residual risks stated in
Chapter 1 of the Installation Manual for PM330 Power Modules can result in accidents with
severe injuries or death.
• Adhere to the fundamental safety instructions.
• When assessing the risk, take into account residual risks.
Note
Use of copper cables for a UL-approved system
For a UL-approved system use 60/75°C copper conductors only.
Preconditions
The persons responsible for the safety of the plant or system must ensure that the following
conditions are met:
● Basic planning work for the system and all work relating to transportation, assembly,
installation, commissioning, maintenance and repairs is carried out by qualified personnel
and checked by responsible, suitably skilled personnel.
● The Operating Instructions and machine documentation are always available.
● The technical specifications regarding the applicable installation, connection,
environmental, and operating conditions are always observed.
● The plant-specific assembly and safety guidelines are observed and personal protection
equipment is used.
● Unqualified personnel are forbidden from using these machines and working near them.
These Operating Instructions are intended for qualified personnel and only contain
information and notes relating to the intended purpose of the machines.
The Operating Instructions and machine documentation are written in different languages as
specified in the delivery contracts.
Braking resistors
Operating Instructions, 10/2016, A5E32845373B AD
WARNING
1
7