Miele H 6880-2 BP Operating And Installation Instructions page 11


This appliance must not be used in a non-stationary location (e.g.
on a ship).

Do not repair or replace any part of the appliance unless
specifically recommended in the operating instructions. All other
servicing should be referred to a qualified technician.

Defective components should be replaced by Miele original parts
only. Only with these parts can safety of the appliance be assured as
intended by the manufacturer.

In order for the oven to function correctly, it requires an adequate
supply of cool air. Ensure that the air flow is not impaired (e.g.
insulation in the cabinetry). Also be sure that the cool air supply is
not heated by other sources nearby.

If the oven is installed behind a cabinet door, do not close the
door while the oven is in operation. Heat and moisture can build up
behind the closed door and cause damage to the oven, cabinetry
and flooring. Do not close the door until the oven has completely
cooled down.

The water intake valve must be installed in an area accessible
after installation.

The protective sleeve of the water intake hose must not be
damaged or become kinked. This will cause it to leak.

The integrated Waterproof System offers protection from water
damage, provided the following conditions are met:
– The oven is properly installed (electric and water).
– A damaged appliance is dangerous. Contact Miele for repair
immediately.
– The water supply has been turned off when the appliance is not
going to be used for a longer period of time (e.g. vacation).
IMPORTANT SAFETY INSTRUCTIONS
11