Wifi Connections; Enabling Support For A Wifi Network Adapter - Panasonic CF-18 Series Supplementary Instructions Manual

1: WiFi Connections

Rev 0.21 Dec.04
Enabling support for a WiFi
network adapter
Subject to feature availability.
In addition to CDMA connections, Watcher allows you to
manage and monitor connections with a WiFi network
adapter. Your WiFi network adapter might be a PC Card or an
internal module.
Note: Watcher supports WiFi only on Windows 2000 or XP.
To enable WiFi support, so that Watcher monitors your WiFi
network adapter:
1. From the main Watcher window, select
General
.
Enable WiFi support
2. Select the
Once WiFi support is enabled, icons on the right side of the
Status box in the Watcher window indicate whether a WiFi
network adapter is active and whether WiFi service is
available:
WiFi network adapter. When displayed, no WiFi
network adapter is detected; WiFi connections are not
possible.
WiFi coverage:
No hotspots are detected.
At least one hotspot has been detected. Detected
hotspots are shown on the WiFi tab (if they are
broadcasting hotspots). The ToolTip shows the
number of WiFi networks detected.
TOOLS > Options >
field.
1
33