Tellerscan® Operator Maintenance - Digital Check TellerScan 215 User Manual

TellerScan 215 & 230 User Manual Rev 050609
TellerScan® 230 Operator Maintenenace
Cleaning the TellerScan® 215 & 230
Over time, ink, dirt and dust particles will collect on the scanner rollers and document
track. Therefore, it is necessary to clean these areas on a regular basis to assure
reliable performance. Tips for performing preventative maintenance by the user on the
TellerScan® 215 or TS230 include:
• A Periodic inspection of the entire document track area. The use of flashlight will
enhance the visual inspection between the scanheads and throughout the
document track.
• Remove any staples, paper clips, and rubber bands that may have accumulated
during use.
• Have a can of compressed air available to blow out the document track on a
regular basis.
• Purchase the TellerScan® cleaning cards to have on hand for regular cleaning
maintenance. Run several scan cycles, flipping the card between cycles, while
holding the card to 'scrub' the first drive or entry rollers. Once the entry rollers no
longer deposit dirt onto the card, allow the card to scan through the entire path.
Run this through several times while flipping the card end to end and top to
bottom.
• Use the special cleaning swabs, which come with the TellerScan® cleaning kit, to
'scrub' the four drive rollers under the center cover.
• Inspect the quality of the captured images on a regular basis. If the image quality
drops off, inspect and clean the scanheads following the procedure described on
page 13 & 14. If the quality does not appear to be related to dirt or debris,
contact your service provider to determine if the scanheads can be recalibrated.
11