Water Dispenser Cleaning Procedure - Electrolux ENB 35405S User Manual

External components:
7. Dispenser
8. Water Lever
9. Water drop tray
INITIAL OPERATIONS TO USE YOUR
WATER DISPENSER
1. Remove every tape and other
protection system
assembly;
2. Clean the components as described
into the WATER DISPENSER CLEANING
PROCEDURE chapter in order to remove
eventual residues;
WATER DISPENSER
PROCEDURE
1. Unblock the two stopping elements on
the sides of the tank as shown in the
pictures;
- Take out the BRITA MAXTRA cartridge
from the water filter unit
- Press the stopping elements in the
middle and move it up.
- Move the stopper into direction of the
central tank
from the tank
CLEANING
2. Push up the tank along the direction of
the Valve
3. Remove the lid and the funnel
4. Unscrew the valve in counter
clockwise (pay particular attention to lose
the Valve Gasket because is necessary to
a correct functioning of the features);
5. Clean the tank lid, the valve and the
gasket with a solution of warm water and
neutral soap. Rinse it and put it inside the
door hole during the cleaning of the other
components (in order to avoid cold air
leakage from the fridge);
6. Clean the tank and funnel into the
dishwasher or with a solution of warm
water and neutral soap and rinse them;
7. After the tank components cleaning
take back the valve from the fridge door
and assembly the tank in the inverse
order (4;3;2;1) of disassembly (pay
attention at the valve gasket positioning);
8. Put the tank assembled on the door
along the valve direction;
9. Block the stopping elements in the
inverse order of unblock;
10. Insert again the BRITA MAXTRA
electrolux 51
GB