What To Do If - AEG 88001 K-IN User Manual

What to do if ...

The appliance cannot be
switched on or is not operat
ing
The residual heat indicator is
not displaying anything
The automatic warm up func
tion is not switching itself on
Sensor fields are getting hot
Repeated acoustic signal (6x),
appliance switches off
Acoustic signal sounds when
appliance is switched off
Acoustic signal sounds and
appliance switches itself on
and then off again; after 5
seconds another acoustic sig
nal sounds
Problem Possible cause
More than 10 seconds have
passed since the appliance was
switched on
The lock is switched on
The child safety device is
l
switched on
Several sensor fields were
touched at the same time
Safety cut out has been trig
gered
STOP+GO is activated
The cooking zone was only on
for a short time and is there
fore not hot
There is still residual heat on
h
the cooking zone
The highest heat setting is set
Ç
Cookware too big or placed
too near the controls
One or more sensor fields have
been covered for longer than
10 seconds
The control panel is wholly or
partly covered by objects.
The On/Off sensor field has
been covered up, e.g. by a
cloth
What to do if ...
Switch the appliance on again.
l
Switch off the lock (See the
section "Locking/unlocking the
control panel")
Deactivate child safety device
(See the section "Child safety
device")
Only touch one sensor field
Remove any objects (pan,
cloths, etc.) that are lying on
the control panel. Switch the
appliance on again
u
Switching off STOP+GO
If the cooking zone is sup
posed to be hot, call the Cus
tomer Service Department.
Let the cooking zone cool
down
The highest heat setting has
the same power as the auto
matic warm up function
Place cookware in the middle
on one of the four cooking
zoznes. Place large cookware
on the back cooking zones in
preference.
Uncover sensor field
Remove objects.
Do not place any objects on
the control panel
23
Remedy