Reversing The Door - AEG S72388-KA User Manual

Reversing the Door

The door hinges can be changed from right (as supplied) to left if
required to suit the location where the appliance is installed.
1
Warning! Unplug from the mains before reversing the door.
0
1. Open the door and remove the
plinth cover to the front. Move
the door hinge bracket cover on
the plinth cover from the left to
the right. Close the door.
On the lower part of the cabinet.
2.
Unscrew the hinge and remove
the door .
Remove the door-closing fittings
from the hinge and put the hinge
pin on the other side.
Then attach the supplied
door-closing fitting.
Move the pedal to the other side.
3. Remove the door fitting from the
door hinge bracket (1, 2). Move
the hinge bracket pivot from the
right to the left hand hole (3).
Place the door fitting supplied on
the hinge bracket pivot (4, 5).
818 42 69
-
00/2
1
5
4
3
2
13