Siemens SICAM P35 Manual page 29

At any time, press "
means password level and the remaining 6 data make up the password (press "▲" to change digits and "▼"
to move cursor). Press "
enter password, press "
reached, parameter setting function will be locked for certain period which is configurable in advance). If the
password is validated, you may enter the first-level menu. The figure shows the read-write items under "Conn"
menu: baud rate and communication address of RS485 port can be set.
Note
"SURE" screen appears after selecting or inputting parameter and pressing "
again to activate new parameter. Pressing "
return to previous menu.
■
SICAM P35 P36, 3-phase Multi-Function Power Meter, User Manual
E50417-H8940-C562-4, Release Date 06.2018
" and " " simultaneously to enter "PASS" screen. The first digit of displayed data
" to confirm. "FAIL" will appear if password level and password are wrong. To re-
". To quit and return to cyclic display state, enter "
" at any time during parameter setting will cancel setting or
Operation and Display
4.3 Key Definition
" (if specified error count is
". Press " " once
29