Download  Print this page

Heartstart Trainer Kit Contents; Optional Accessories; Installing Or Replacing The Batteries - Philips HeartStart Trainer M5085A Instructions For Use Manual

Hide thumbs



HeartStart Trainer Kit Contents

The HeartStart Trainer M5085A comes with the following:
Adult training pads cartridge
Carry case (does not include scissors)
Instructions for Use
External Manikin Adapter strip (1)
Quick Reference

Optional Accessories

M5085-91900 HeartStart Trainer Instructions for Use
M5087A Replacement Carry Case (Philips)
M5073A Adult Training Pads Cartridge
M5074A Infant/Child Training Pads Cartridge
M5093A Replacement Adult Training Pads*
M5094A Replacement Infant/Child Training Pads*
M5088A Internal Manikin Adapter (1/pouch)
M5089A External Manikin Adapters (10/box)

Installing or Replacing the Batteries

The HeartStart Trainer is powered by four AA alkaline batteries (not
included). To install or replace the batteries, follow the steps below:
1. Press the latch on the battery compartment door on the back of the
Trainer. Lift off the door and set it aside.
2. Remove the old batteries and recycle appropriately.
3. Insert four new AA alkaline batteries into the recess, oriented according
to the diagram provided on the inside of the recess.
4. Replace the battery compartment door and press down to ensure the
latch holds it in place.
Includes pads and resealable film cover.


Table of Contents

   Also See for Philips HeartStart Trainer M5085A

Comments to this Manuals

Symbols: 0
Latest comments: