Removing And Installing The Battery; Charging The Battery - Haier C1000 User Manual

Getting Started

1.1.1 Removing and installing the battery

When removing the battery, carefully open the battery cover, and pull out
the battery.
To replace the battery, place the bottom of the battery into the battery
store, and press it in until the battery is securely in place. Replace the
battery cover.

1.1.2 Charging the battery

Insert the connector of the charger into the bottom of the mobile phone.
When the charger is connected to the power supply, the display of the
mobile phone will show a dynamic charging icon as the battery is
charging.
When the display shows a static charging icon, it means that battery
charging is complete. During charging, the battery, mobile phone and
charger will be warm or hot to touch, which is a normal state for battery
charging.
After charging is complete, disconnect the power supply, and remove the
charger.
Warning: The mobile phone must be within a temperature range of
℃
+5 ~+40 . Do not use a charger that has not been provid
6
℃
ed by