Security Settings - Haier HG-U69 Manual

this function.

6.4.6 Security Settings

6.4.6.1 SIM1 Security Settings
- SIM1 Lock
Set the phone to ask for your PIN code each time
you start your phone (if this function is supported by
your SIM card).
Note: After three consecutive incorrect PIN code
entries, the code will be blocked, and you need the
PUK code to unblock it.
The PIN code and PUK code are usually supplied
by the SIM card. If you don't get them, please
contact with the supplier. The default PIN code is
1234 usually.
-Fixed Dial
If your SIM support Fixed dial, it can limit you to call
65
fixed number. When the function is on, it can only
call the phone number or phone number start by the
fixed dial number.
Note: it needs you to input PIN2 code to open or
close this function. You can get the PIN2 code from
service supplier. If the fixed dial is on, the
phonebook only show the number of fixed dial.
- Change Password
You can change SIM1 PIN code, PIN2 code
password here.
Note: the three codes are numbers between 4 and 8
digits.
6.4.6.2 SIM2 Security Settings
Access submenu to use some function such as
SIM2 lock, fixed dial, change password. User can
refer to the SIM1 security settings.
66