LG 32LE5500 Owner's Manual page 126

MY MEDIA
Installing Nero MediaHome 4 Essentials
Nero MediaHome 4 Essentials is easy to use DLNA server software for Windows.
Requirement PC system before you install Nero MediaHome 4 Essentials
ꔛ
Windows® XP (Service Pack 2 or higher), Windows Vista® (no Service Pack required), Windows® XP
Media Center Edition 2005 (Service Pack 2 or higher), Windows Server® 2003
ꔛ
Windows Vista® 64-bit edition (application runs in 32-bit mode)
ꔛ
Hard drive space: 200 MB hard drive space for a typical installation of Nero MediaHome stand-
alone
ꔛ
1.2 GHz Intel® Pentium® III or AMD Sempron™ 2200+ processors
ꔛ
Memory: 256 MB RAM
ꔛ
Graphics card with at least 32 MB video memory, minimum resolution of 800 x 600 pixels, and
16-bit color settings
ꔛ
Windows® Internet Explorer® 6.0 or higher
ꔛ
DirectX® 9.0c revision 30 (August 2006) or higher
ꔛ
Network environment: 100 Mb Ethernet, WLAN (IEEE 802.11b/g/n)
1 Start up your computer, and insert the Nero MediaHome 4 Essentials CD-ROM into your compu-
ter's CD-ROM drive.
An installation wizard will walk you through the quick and uncomplicated installation process.
2 Close all Microsoft Windows programs and exit any anti-virus software that may be running.
3 Insert the Nero MediaHome 4 Essentials CD-ROM into your computer's CD-ROM drive.
4
Click Nero MediaHome 4 Essentials. The installation is prepared and the installation wizard
appears.
5
Click the Next button to display the serial number input screen.
Click Next to go to the next step.
6
If you accept all conditions, click I accept the License Conditions check box and click Next.
Installation is not possible without this agreement.
7
Click Typical and click Next. The installation process is started.
8
If you want to take part in the anonymous collection of data, select the check box and click the
Next button.
9
Click the Exit button to complete the installation.
Sharing files and folders
After installing Nero MediaHome, you must add folders you wish to share.
Double-click the Nero MediaHome 4 Essentials icon on the desktop.
1
2 Click Network icon on the left and define your network name in the Network name field. The
Network name you enter will be recognized by your TV.
3 Click Shares icon on the left.
4
Click Local Folders tab on the Shared screen.
5
Click Add icon to open the Browse Folder window.
6 Select the folder containing the files you want to share. The selected folder is added to the list of
shared folders.
7
Click Start Server icon to start the server.
!
NOTE
►If the shared folders or files are not displayed on the TV, click the folder on the Local Folders
tab and click Rescan Folder at the More button.
►Visit www.nero.com for more information and software tools.
126