Electrolux EKG 603301 Instruction Booklet page 42

42 electrolux
completely tighten the adjustment screw
in. If changing from liquid gas to na-
tural gas 20 mbar, undo the by-pass
screw about 1/2 of a turn. If changing
from natural gas 20 mbar to natural
gas 13 mbar undo the by-pass screw
about 1/4 of a turn. If changing from
liquid gas to natural gas 13 mbar,
undo the by-pass screw about 3/4 of
a turn.
3. Reassemble the knobs following the
same procedure backwards.
4. Finally check that turning quickly the
tap from maximum position to
minimum position, the flame does not
go out.