Table of Contents
Advertisement
Retrieving option: set which part of e-mails
the phone retrieves from the server.
Keep in server: leave the copies of e-mails in
the server after retrieving.
My address: set your e-mail address.
User name: enter the POP3 or IMAP4 user
name.
Password: enter the POP3 or IMAP4 password.
Use SMTP authentication: enable SMTP
authentication, which requires the user to log in
before sending e-mails.
Same as POP3/IMAP4: select if you want the
SMTP server to have the same parameters as the
POP3 or IMAP4 server.
User name: enter the SMTP user name.
Password: enter the SMTP password.
Voice mail
(Menu 5.0.4)
You can change the number of the voicemail server.
You must store the voicemail server number
before accessing the server. Your service provider
can give you the number.
Push message
(Menu 5.0.5)
You can change the settings for receiving push
messages from the wireless web server.
•
Receiving option: set whether or not to receive
push messages from the web server.
•
Service loading: set whether or not your phone
automatically launches the web browser to
access a push message as it comes in.
Broadcast
(Menu 5.0.6)
You can change the settings for receiving broadcast
messages.
•
Receive: select to receive broadcast messages,
or not.
•
Channel: indicate the channels from which you
wish to receive broadcast messages. Please
contact your service provider for further details.
•
Language: select the preferred languages in
which broadcast messages display.
Memory status
(Menu 5.*)
Use this menu to view the amount of memory
currently in use in each message folder.
59
Advertisement
Table of Contents
