Echo Liquid Handler Software - Labcyte Echo 525 User Manual

Echo Liquid Handler Software

Echo Liquid Handler Software
The Labcyte Echo Liquid Handler comes with user software. The Echo Liquid Handler software provides a Windows-based
graphical user interface (GUI). The user can control the Echo Liquid Handler and execute most of its functions which are listed
below:
Protocols Window : defines new liquid transfer protocols and edit or delete existing protocols; run the protocols.
l
Labware Window : defines new destination plates, and edit or delete existing destination plate definitions.
l
Diagnostics Window: monitors Echo Liquid Handler status; directly control most of the Echo Liquid Handler motor function
l
and perform diagnostic procedures.
Calibration Window: performs calibration procedures.
l
Advanced Window
l
Status Window: monitors Echo Liquid Handler functions.
l
: changes transfer options; reset or shut down the Echo controller.
CHAPTER 5 | Software
88