Diagnosis Menu - Sony HDC2500 Operation Manual

DIAGNOSIS Menu

This menu is only for viewing and camera settings cannot be
made using this menu.
DIAGNOSIS
Page title Item
PageNo.
<OPTICAL LEVEL> CCU t CAM
(HDC2500/2400)
CAM t CCU
D01
CABLE LENGTH
<BOARD STATUS> OHB
D02
DPR
SY
PS
SDI
CD
TR
HOURS METER
<ROM VERSION> CAMERA APP
D03 (U15)
OS
PANEL
HKCT
TG
SY
DPR1
DPR2
DPR3
SDI
CD
TR
<SERIAL NO.> MODEL
D04
NO.
EFFECTIVE FUNCTION
<POWER SUPPLY CAM INPUT VOLTAGE
STATUS>
D05
CAM CONSUMPTION
CABLE LENGTH
Note
This display has a
margin of error for the
display of the electric
supply state of a
camera. Use only as a
guide.
However, some items set the conditions for viewing.
Indication
GREEN, YELLOW, RED, NG, NO SIGNAL
GREEN, YELLOW, RED, NG, NO SIGNAL
x.x km
OK, NG
OK, NG
OK, NG
OK, NG
OK, NG
OK, NG
OK, NG
xxxx H
Vx.xx
Vx.xx
Vx.xx
Vx.xx
Vx.xx
Vx.xx
Vx.xx
Vx.xx
Vx.xx
Vx.xx
Vx.xx
Vx.xx
HDCxxxx
xxxxxxx
0% to 100%, 100% OVER
xx.x A
x.x km
69
Description
Displayed only when a CCU is connected.
Displayed only when a CCU is connected.
Displays the camera cable length. (Applies
only to HDC2500/2400 not used with HDFX/
HDTX. Displayed only when a CCU is
connected.)
HDC2500/2400 only
HDC2570 only
HDC2550 only
Displays the total working time.
Displayed only when HDLA is attached.
Displayed only when HKC-T1500 is
installed.
HDC2500/2400 only
HDC2570 only
HDC2550 only
Displayed if any option is installed.
Displays the ratio of the input voltage for a
camera to the output voltage for a CCU.
Displays camera current consumption.
Displays the cable length that a CCU
measured. (Displayed only when a CCU is
connected.)