Vf Marker - Sony HDC2500 Operation Manual

OPERATION
Page title Item
PageNo.
<' ! 'IND> ND
02 (U05)
CC
WHITE
5600K
GAIN
SHUTTER
FAN
EXT
FORMAT
Y TALLY
<VF MARKER> MARKER
03 (U06)
LEVEL
CENTER
SAFETY ZONE
EFFECT
ASPECT
Settings
ON, OFF
1, 2, 3, 4, 5 (combination allowed)
ON, OFF
A, B, C, D, E (combination
allowed)
ON, OFF, ---
P, A, B (combination allowed)
ON, OFF, ---
ON, OFF
ON, OFF, ---
L, M, H (combination allowed)
ON, OFF, ---
ON, OFF
ON, OFF
AUTO1, AUTO2, MIN, MAX
ON, OFF
ON, OFF
HDC2500: 1080-59.94i, 1080-
29.97PsF, 1080-50i, 1080-
25PsF, 1080-24PsF, 1080-
23.98PsF, 1080-59.94P, 1080-
50P, 720-59.94P, 720-50P,
1080-59.94i (2×), 1080-50i (2×),
720-59.94P (2×), 720-50P (2×)
HDC2400/2570/2550: 1080-59.94i,
1080-50i, 720-59.94P, 720-50P
ON, OFF
ON, OFF
WHITE, BLACK, DOT
0 to 100%, 40%
ON, OFF
1, 2, 3, 4
ON, OFF
80.0, 90.0, 92.5, 95.0%
ON, OFF, OFF(ASSIST IND),
OFF(AF DISP)
ON, OFF
16:9, 15:9, 14:9, 13:9, 4:3, (4.3)
MASK ON, OFF, (ON)
0 to 15, 12
SAFETY ON, OFF, (AREA)
80.0, 90.0, 92.5, 95.0%
Description
[IND]: Sets whether to be included in the status
indications on the viewfinder screen (see page
33).
[NORMAL]: Specifies the conditions under which
the '!' indication is not to be displayed even if
[IND] is ON. (By specifying the standard or
normal conditions here, non-standard or
abnormal conditions can be found with the '!'
indication on the viewfinder screen.)
e.g.: With the default setting of ND, the '!' indication
is displayed when an ND filter other than 1 is
selected.
--- : When a CCU is connected (cannot be changed)
Note
CC is available for HDC2500/2570/2550 only.
Sets MARKER to ON/OFF.
1: Entire cross
2: Entire cross with a hole
3: Center
4: Center with a hole
OFF(ASSIST IND): Displayed when INDICATOR of
<FOCUS ASSIST> is ON.
OFF(AF DISP): Displayed when AF DISPLAY of
<LENS1> is ON.
(4.3): If VF SCAN is set to 4:3 when HDLA is
attached (cannot be changed)
(ON): If VF SCAN is set to 4:3 when HDLA is
attached (cannot be changed)
Sets the level to darken outside the aspect area.
For the safety marker in Aspect mode.
(AREA): Displayed when AREA MARKER of
<FOCUS ASSIST> is ON.
47