Miele HR 1134-1 Operating Instructions Manual page 70

Frequently Asked Questions
Problem
 flashes in the
display.
 appears
unexpectedly in
this display and
the  symbol
flashes at the
same time. The
signal may also
be sounding.
 
appears in the
display.
  appears in the
display.
  appears in the
display.
A noise is heard after
the cooking process is
complete.
The oven has turned
itself off.
The oven lighting turns
off after a short time.
70
Possible cause and solution
There has been a power failure.
 Reset the time of day (see "Using for the first
time").
Cooking times will also need to be reset.
The oven has been operating for an unusually long
period of time, this has activated the "Safety switch-
off feature".
 Turn the mode selector to OFF. The oven is now
ready to use.
The Self Clean program door lock is not locking.
 Turn the mode selector to the Self Clean program
again.
If the problem persists, contact Miele Technical
Service.
The door lock for the Self Clean program will not
deactivate.
 Turn the mode selector to the Off position and turn
the oven off.
If the problem persists, contact Miele Technical
Service.
A fault has occurred that you cannot resolve.
 Contact Miele Technical Service.
After the cooking process the cooling fan will
continue to run for a while after a program is
complete to prevent moisture from building up in the
oven, on the control panel or surrounding cabinetry.
The cooling fan will turn off automatically.
The oven turns off automatically if a button is not
pressed after a certain amount of time or after a
cooking program has ended to save power.
 Turn the oven back on.
The oven is factory set to turn off automatically after
15 seconds. This setting can be changed (see
"Settings overview –  ").