Connecting Power; Assigning The Ip Address To This Unit - Sony Ipela SNT-V704 Installation Manual

Connecting Power

Connect the supplied AC adaptor and the
AC power cord as illustrated below.
1 12
1
/O
13 24
SEE INSTRUCTION MANUAL CLASS 2 WIRING DC 12V
AC adaptor
(supplied)
AC power code
2 3 4
DC IN 12V
to the wall
outlet
Connecting Power /Assigning the IP Address to this Unit
Assigning the IP
Address to this Unit
To connect this unit to a network, you need
to assign a new IP address to the unit.
Before assigning the IP address, connect the
unit to a computer or a network.
For details, see "Connecting to a Computer
or a Network" (page 13).
You can assign the IP address in two ways:
• Using the setup program stored in
the supplied CD-ROM
For details on the operations, see
"Assigning the IP Address Using the Setup
Program" on page 16.
• Using the ARP (Address Resolution
Protocol) commands
Open the DOS window on the computer and
enter the specified ARP commands.
For details on the operations, see
"Assigning the IP Address to this Unit Using
ARP Commands" in the User's Guide stored
in the supplied CD-ROM.
Notes
For determining the IP address to be
assigned to this unit, consult your system
administrator.
15
GB