Specifications - Makita CV100D Instruction Manual

• Charge the battery cartridge with room temperature at
10°C - 40°C (50°F - 104°F).
• Let a hot battery cartridge cool down before charging it.
• Charge the battery cartridge if you do not use it for a
long period (more than six months).
• For an optimum life-time, the battery cartridge have to
be fully charged, after use.
FCC Cautions to the user
The changes or modifications not expressly approved by
the party responsible for compliance could void the user's
authority to operate the equipment.
The equipment has been tested and found to comply with
the limits for a Class B Digital Device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instruction, may cause harmful
interference to radio communication.
However, there is no grantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and
(See the last part of this instruction manual for all the illustrations.)
DESIGNATION OF PARTS (Fig. 1)
1. Power button
2. Battery holder pocket (Backside)

SPECIFICATIONS

Model
Temperature adjustment steps
Material
USB power supply port
Operating time (h)
Rated voltage (V)
Battery cartridge
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Operating time may differ depending on battery type and usage condition.
4
3. Power cable (Inside the battery
holder pocket)
CV100D
With battery BL1014
Low APPROX. 4.5
Medium APPROX. 2.5
High APPROX. 1.5
12 V Max.
BL1014
on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and
receiver.
– Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV
technician for help.
ICES-003 STANDARD : CAN ICES-3(B)/NMB-3(B)
For United States:
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
SAVE THESE INSTRUCTIONS.
CAUTION: Only use genuine Makita lithium-ion
batteries. Use of non-genuine Makita batteries, or
batteries that have been altered, may result in the battery
bursting causing fires, personal injury and damage.
Shell and Lining: 100% Nylon
Side: 90% Polyester
10% Spandex
Arm hole circumference: 100% Polyester
Fill: 100% Polyester
–
With battery BL1450
APPROX. 18
APPROX. 10
APPROX. 5.5
BL1415, BL1415N,
BL1430, BL1430B,
BL1440, BL1450,
BL1460B
4. Battery holder
DCV200
3
DC 5V, 2.1A
With battery BL1850
APPROX. 28
APPROX. 16
APPROX. 8
14.4
BL1815, BL1815N,
BL1820, BL1820B,
BL1830, BL1830B,
BL1840, BL1840B,
BL1850, BL1850B,
18
BL1860B