Advertisement
Quick Links
www.insigniarange.com
Last Modified: 07/10/2015
www.insigniarange.co.uk
INSTALLATION MANUAL
30 Day Technical Support:
01908 226545
GT1000
(NOTE: This service is only available to customers from the day of delivery,
please have your supplier's details and your postcode to hand before calling)
Replacements Parts:
inside of your warranty contact:
www.insigniarange.co.uk/customerService.aspx
Spares/Replacements Parts:
outside of your warranty
contact 0844 800 3069
ATTENTION INSTALLERS:
These instructions must be
left with the customer
WARRANTY REG NO: __________________________
to claim your full 5 year warranty, register your shower within 90 days at: www.insigniarange.co.uk/warrantyreg.aspx
Advertisement
Related Manuals for Insignia GT1000
Summary of Contents for Insignia GT1000
- Page 1 INSTALLATION MANUAL 30 Day Technical Support: 01908 226545 GT1000 (NOTE: This service is only available to customers from the day of delivery, please have your supplier’s details and your postcode to hand before calling) Replacements Parts: inside of your warranty contact: www.insigniarange.co.uk/customerService.aspx...
- Page 2 www.insigniarange.com Last Modified: 07/10/2015 Contents Introduction Electrical Requirements What’s In The Boxes? Screw Pack Contents Plumbing Requirements Starting The Installation Water Connections Sealing and Water Testing Help Book Information Parts List...
- Page 3 Last Modified: 07/10/2015 Thank you for your recent purchase of an Insignia shower. Please read this booklet with great care to ensure you get the best out of your build and have a shower that will last for many years to come! Like everything, in order to obtain a first class product that will serve you well for many years, the effort and correctness put into the assembly will reflect in the quality of your finish.
- Page 4 www.insigniarange.com Last Modified: 07/10/2015 ASSEMBLY AND SIMPLE PLUMBING THIS PRODUCT BUILD IS RATED SUITABLE FOR DIY PURPOSES PROVIDING THE CUSTOMER IS OF ABOVE AVERAGE SKILLS AND FEELS CONFIDENT IN THEIR ABILTY. ONLY YOU THE CUSTOMER WILL KNOW THIS SO BEFORE ANY ATTEMPT IS MADE TO ASSEMBLY READ THROUGH THE FOLLOWING PAG- ES IN DETAIL THEN DECIDE.
- Page 5 www.insigniarange.com Last Modified: 07/10/2015 Requirements Scissors Stanley Blade Silicone Gun Spirit Level Tape Measure Philips Screwdriver Electric Drill...
-
Page 6: What's In The Boxes
www.insigniarange.com Last Modified: 07/10/2015 Whilst the next steps show you how to assemble your shower we want to make sure you have a correct build to ensure you get a trouble free shower. Therefore our advice is to follow the instructions and perform a dry run to ensure you are confident with the build and you understand fully how the unit is assembled. When we use the word “DRY RUN”... - Page 7 Note: In some cases you may have more screws than needed, this is done so you have spares! VERY IMPORTANT Have you got everything? If not please contact the Insignia Support Line on 01908 226545. Remember NEVER book your tradesman until everything has arrived, been checked and is present.
- Page 8 www.insigniarange.com Last Modified: 07/10/2015 Pressure Requirements from your house supply We recommend a bar pressure between 2.5 and 3.4 BAR. If you have a combi boiler system no problem should be experienced. If you have a gravity feed older type installation (hot water tank type usually less than 1 bar) you will almost certainly need a pump.
- Page 9 Please note the ‘U’ shaped channel is meant to face inwards to allow the glass to fit correctly. (Insignia logo on top rail) PLEASE NOTE The screw head needs to bypass the OUTER hole. If this...
- Page 10 www.insigniarange.com Last Modified: 07/10/2015 Step 2 Take the 2 x pieces of flat side glass and run the plastic seal down 1 side of each piece and cut to length if required. Step 3 Align the 2 x side glass panels with the rubber seal into the glass frame as shown below and push tightly in to position.
- Page 11 www.insigniarange.com Last Modified: 07/10/2015 Step 4 Offer your glass frame up to the tray Step 5 Taking the pre-fabricated back wall, offer it up to the tray and align to the front glass. Once you are happy with the overall position, remove the back wall and run a bead of silicone under the bottom of the back wall and place back on the tray.
- Page 12 www.insigniarange.com Last Modified: 07/10/2015 Step 6 Screw the back wall to the tray using screw type ST25...
- Page 13 www.insigniarange.com Last Modified: 07/10/2015 Step 7 Align the roof on to the top of the shower as shown below and secure in to position using screw type ST20 Step 8 Fit the adjustable wheels to the top and bottom of the glass doors and ensure the wheels are at their lowest position and hang on the inner curved rails with the wheels facing the outside of the glass.
-
Page 14: Accessory Installation
www.insigniarange.com Last Modified: 07/10/2015 Accessory Installation Handle Ensuring that the inner thread is protruding out from the handle far enough, place the handle on the outside of the door and secure by tightening the inner chrome knob to the protruding inner thread. Monsoon Head Attach the grey hose from your valve to the inner black tube using PTFE tape (please note this only needs to be... - Page 15 Connect the corresponding hoses to the rear of the valve as shown. Device output may differ from the image. Please refer to your outer chrome faceplate in- side your Insignia shower as a reference point. IF YOUR DIAL DOES NOT CORROSPOND TO THE APPROPRIATE DEVICE: Turn on your water to the shower and note which output the water exits from then turn off the water and swap over the relevant hose.
- Page 16 www.insigniarange.com Last Modified: 07/10/2015 Silicone Seal where shown in red on the inside of the shower TESTING FOR WATER LEAKS LEAVING SHOWER 24 HOURS AFTER BUILD ALLOWING SEALENT TO CURE With all connections tight, the waste and hoses checked, jets fully sealed, your shower still around 18 inches from its designated final resting point and the silicone fully cured (hence leaving for 24 hours minimum) Switch on the overhead shower NOT the massage jets, remember these will fire water out at you and are not suitable for checking leaks as they would normally only operate when a...
-
Page 17: Need Help
Last Modified: 07/10/2015 Need Help? If so then simply download Insignia’s free comprehensive help and troubleshooting brochure now! Simply visit: www.insigniarange.co.uk/help.aspx... - Page 18 External Items Framework Part Code Part Description Part Code Part Description Part Code Part Description SP063 Monsoon Shower head SP300 Waste hose GT1000-1 Tray SP226 Massage jets GT1000-2 Roof SP221 Drain Hose SP123 Hand shower holder GT1000-5 Bottom rail SP308...
- Page 19 All images are registered with ImageTraker Insignia™ is a registered trademark of Maclean International Ltd All images are subject to copyright. Images may not be used in any way shape or form with out written permission from Maclean International Ltd. Images are NOT permitted...