Na-protection according to vde-ar-n 4105, in-plant power generators on the low voltage grid;
for use in in-plant power generators on the medium voltage grid according to bdew;with selectable vector shift detection;with selectable rate of change of freque (46 pages)
Summary of Contents for ZIEHL MS220VA
Page 1
ZIEHL industrie – elektronik GmbH + Co KG Daimlerstr.13, 74523 Schwäbisch Hall, Germany + 49 791 504-0, info@ziehl.de, www.ziehl.de Temperature Relays and MINIKA® Mains Monitoring Digital Panelmeters MINIPAN® Switching Relays and Controls Measuring Transducers Grid- and Plant Protection updated: 2019-02-06/Su...
6 PTC thermistors in series 4 Application and brief description Ziehl PTC thermistor relays protect motors, transformers, machines and equipment against thermal overload. Used in conjunction with respective PTC thermistors they provide a reliable temperature protection in the temperature range 60 °C up to 180 °C.
ZIEHL PTC thermistor relays are conform to EN 60947-8 and are thus exchangeable. PTC-thermistors according DIN 44081 and DIN 44082 shall be connected. PTC thermistors are suitable for the installation into windings of electrical machines, bearings and transformers as well as to monitor the temperature of liquid media, airflow and gases.
Function diagram MS220VA (automatic reset) MSR220VA (reclosing lock) Caution! The released relay switches on automatically after a voltage dip. 8 Important Notes Attention! Observe safety rules and standards. Notice safety remarks! DANGER! Hazardous voltage! Will cause death or serious injury. Turn off and lock out...
Frequency (AC) 50 / 60 Hz 45 Hz … 65 Hz Tolerance of frequency Power consumption < 2 VA < 2 W On-period 100 % Voltage dip buffer time Max. 20 ms MS220VA and MSR220VA 11660-0701-03-GB Page 6 / 12 www.ziehl.de...
Page 7
≤ 2000 m above see level Alltitude Climatic conditions 5-85% rel. F, no condensation (3K3 EN 60721-3-3) 2…13.2 Hz ± 1 mm 13.2 ... 100 Hz ± 0,7 g Vibration resistance EN 60068-2-6 MS220VA and MSR220VA 11660-0701-03-GB Page 7 / 12 www.ziehl.de...
The response of the thermal motor protection must directly switch off the motor, also when used together with converters. This must be realized in the logic section or configuration in the converter. MS220VA and MSR220VA 11660-0701-03-GB Page 8 / 12...
Zone 1 and Zone 21 and for Equipment Under Control (EUC) Category 2 (HFT = 1) in Zone 0 and Zone 20. The combined equipment shall comply with the relevant standards EN 60079-0 respectively EN 61241 according to the categories to match. MS220VA and MSR220VA 11660-0701-03-GB Page 9 / 12...
Trip devices type MSR 220VA switch on automatically with return of supply voltage. The user must guarantee by external interlock (see connection diagram) so the supervised motor/machine does not start again independently. MS220VA and MSR220VA 11660-0701-03-GB Page 10 / 12 www.ziehl.de...
EN 60079-17 is to be observed. You’ll find this and other user manuals in the internet under www.ziehl.com ZIEHL industrie – elektronik GmbH + Co KG Daimlerstr. 13 74523 Schwaebisch Hall Germany Fon + 49 791 504-0 info@ziehl.de www.ziehl.de...
Need help?
Do you have a question about the MS220VA and is the answer not in the manual?
Questions and answers