Mounting Accessories - Honeywell Searchpoint Optima Plus Operating Instructions Manual

MAN0905_Issue 7_07/17
Flow Housing (2108B0282) Remote Gassing Cell (2108B0240)
Inlet
Outlet
For use in sampling system applications.
Material: solvent resistant anodised
aluminium, with stainless steel nozzles,
outside diameter 6 mm. Searchpoint
Optima Z is only supplied with a flow
housing.

2.7 Mounting Accessories

Junction Box Adaptor Plate (04200-A-1040)
2. Introduction
The Junction Box Adaptor Plate enables low
gland clearance junction boxes to be used without
the Searchpoint Optima Plus fouling on the wall
/ mounting surface, for example the Honeywell
Analytics Junction Box (00780-A-0100). It also
has mounting points for the DVC100 and DVC100
MK2 termination units.
16
Searchpoint Optima Plus with optional HART
Enables high %v/v concentration gas
to be applied remotely for performing
bump tests. Useful for units installed in
ducts or inaccessible areas. Required for
0 – 100 %v/v methane range (sampling
system only). Searchpoint Optima X has
a special version of the RGC.
The RGC is a factory fitted option.
output
®
Operating Instructions
2108M0550