1 Verify the following pre-installed connections:
— Cable W406 to connector X6
— Audio IN from the Host Computer to X4 (audio
2 Connect the following:
— Cable W402 from the CT Box
— Cable W124 from the Gantry
— Cable W125 from the Gantry
Connecting the UPS (Option)
This procedure provides instruction for UPS (Row Export Configuration) installation and setting.
Standard FSE service toolkit
CSIP Level 0
The X5 connector is for connecting an
Injector to the system.
UPS (Normal Configuration) instruction will be supplied in next version.
© 2010 Koninklijke Philips Electronics N.V All Rights Reserved
Cable W406 Power Supply IN
Cable W402 to
Refer to Front Cover