Predated Laptime; Setting Up The Predated Laptime; Functionality And Channel Outputs - Bosch DDU 9 Manual

17 | Predated Laptime

17.1 Setting up the predated laptime

17.2 Functionality and channel outputs

138 / 148
17 Predated Laptime
The predated laptime function allows to compare the current lap- and segment time with
the predated time of an expected lap. Additional the function can estimate the laptime of
the current lap. This functionality is integrated in the laptrigger module in RaceCon.
To use the predated laptime function you need to set up a laptrigger as described in the
chapter Lap Trigger. Under the ribbon "Segment timing" you need to choose your seg-
mentation mode which can either be distance or intermediate trigger based.
Distance or
Intermediate
Trigger
For the distance mode you need to check on an old lap or estimate how long it takes to
travel the segment distance. Please enter those values into input field. The values can also
be copied and pasted to the input field from an excel sheet as a normal text. In the inter-
mediate trigger you just need to set the expected time the driver takes to reach the seg-
ment trigger.
NOTICE
Please note that the segment time and length is always measured
from the start line or where the main lap trigger is set.
Following output channels are generated by the predated laptime function.
Laptrigger_lapdiff_pred_dls
Laptrigger_lapsegdiffpred_dls
Laptrigger_Lapcurrpred_dls
The channel Laptrigger_lapdiff_pred_dls is updated as soon as the main lap trigger is re-
ceived. Both other channels are updated as soon as the next segment distance is travelled
or the next intermediate trigger is received.
Laptime difference between the predated
and the last laptime
lagseg difference between the last segment
and the predated segment.
Estimated laptime of the current lap, based
on the predated laptime and the predated
segment deviations
DDU 9 Bosch Motorsport