Table of Contents
Advertisement
13 | Online Measurement
13.2.2 Performing the online offset calibration
104 / 148
In the channel view
DDU 9 has to be connected to RaceCon to calibrate the sensor's offset.
1.
Apply the desired physical condition to the sensor (e.g. 1 G to an acceleration sensor).
2.
Open the measurement channel's online page by double-clicking on the measure-
ment channel name in the Data Area.
3.
Enter the physical target value (e.g. 1 G) and press the 'Calibrate' button.
Calibration
target value
Initiate
calibration
The sensor's offset is now calibrated.
DDU 9
Check box to enable online
offset calibration and enter
desired physical target value
Activate switch
to enable online
calibration
Bosch Motorsport
Hide quick links:
Advertisement
Table of Contents
