Sony HT-X8500 Operating Instructions Manual page 14

select the TV input and check the status of
the indicators on the Sound Bar.
– The TV and BLUETOOTH indicators light:
The Sound Bar and TV are connected
and TV sound is output from the Sound
Bar.
– The BLUETOOTH indicator flashes
quickly: Perform pairing on the TV.
– The TV indicator lights: Perform the
connecting operation again from the
start.
• When you connect the Sound Bar and TV
with the HDMI cable (supplied), the
BLUETOOTH connection is canceled. To
connect the Sound Bar and TV with the
BLUETOOTH function again, disconnect
the HDMI cable, then perform the
connecting operation from the start.
• To pair another TV after the first TV is
paired, turn off the paired TV, then pair
the new one by following the steps of
mobile device connection (page 24).
Listening to the Sound of the
TV or Device that is
Connected to the TV
You can turn the Sound Bar on/off,
adjust the volume, and mute the sound
by using the TV remote control when
connecting the TV to the Sound Bar
wirelessly.
1
Turn the TV on with the TV remote
control.
The Sound Bar is turned on by
interlocking with the TV power and
TV sound is output from the Sound
Bar.
2
Select the program or input of the
TV by using the TV remote control.
The sound of the image displayed
on the TV screen is output from the
Sound Bar.
14
GB
3
Adjust the volume of the Sound
Bar by using the TV remote
control.
When pressing the mute button on
the TV remote control, the sound is
muted temporarily.
Tip
When the TV is turned off, the Sound Bar is
also turned off by interlocking with the TV
power.