Table of Contents
Advertisement
INITIAL FIRING INSTRUCTIONS
To be used on initial firing or anytime the grill runs out of pellets.
proper operation of the grill, you must first allow the auger tube to be "charged" with pellets.
WARNING! When operating this grill, maintain a minimum clearance of 12" / 30.5 cm
from grill to combustibles.
Remove the porcelain-coated grill
1
grate, grease drain pan, and heat
baffle from the inside of the grill.
Make sure there are no foreign objects
3
in the auger. Turn the switch ON (I)
and the temperature dial to SMOKE.
Make sure the auger is turning (inside
the pellet hopper).
10
With the switch in the OFF (O)
2
position, plug the power cord into an
appropriate grounded electrical outlet.
Check that there is air movement from
4
the draft inducer fan by placing your
fingers over the firepot. If the hot rod
is getting hot, it will turn red.
CAUTION! Do not touch the hot rod.
Turn the temperature dial to
SHUT DOWN CYCLE.
In order to ensure
Hide quick links:
Advertisement
Table of Contents
