Panasonic KX-TG2711 Operating Instructions Manual page 31

Registering a handset to the base unit
1
2
3
4
5
Deregistering a handset
1
2
3
4
5
6
Changing the base unit PIN (Personal Identification Number)
Important:
R If you change the PIN, please make note of your new PIN. The unit will not reveal the PIN to
1
2
3
4
5
TG271xFX(en-en)_0919_ver011.pdf
Downloaded from www.Manualslib.com
Handset:
M N
MbN: "Handset Setup" a M
MbN: "Register H.set" a M
Base unit:
Press and hold M N for about 5 seconds. (No registration tone)
R If all registered handsets start ringing, press M
(KX-TG2712)
R The next step must be completed within 90 seconds.
Handset:
Wait until "Enter Base PIN" is displayed. a Enter the base unit PIN (default: "0000").
a M N
R If you forget your PIN, contact an authorised service centre.
R When the handset has been registered successfully,
M N
MbN: "Base Unit Setup" a M
335 a M N
R All handsets registered to the base unit are displayed.
Enter the desired handset number you want to cancel. a M
MbN: "Yes" a M N
R A confirmation tone sounds.
R The handset does not beep when cancelling its own registration.
M N
you. If you forget your PIN, contact an authorised service centre.
M N
MbN: "Base Unit Setup" a M
MbN: "Base Unit PIN" a M
Enter the current 4-digit base unit PIN (default: "0000").
Enter the new 4-digit base unit PIN. a M
31
manuals search engine
Useful Information
N
N
N again to stop, then repeat this step.
stops flashing.
N
N
N
N a M N
2012/09/19
N
31
15:02:01