Example - HP 27115A Installation Manual

Note
If you do not respond to the target device prompt - that is, you simply press the
"return" or "enter" key - test steps that require a target device will default to the
one directly attached to the
HP-FL
cable.
Some diagnostic sections involve destructive tests and may not be run unless the
user has logged in with the required level of security. Consult your system
manager.
Example
:SVSDIAG
******************************************************************
***** ***
*****
ONLINE DIAGNOSTIC SUBSYSTEM
***
*****
***
*****
(C) Copyright Hewlett Packard Co. 1987
***
*****
All Rights Reserved
***
*****
DUI Version A.xx.yy Monitor Version A.xx.yy
***
*****
***
******************************************************************
Type "HELP" for assistance
DUI> RUN HPFLDIAG PDEV=w/x.y
"PDEV"
is the physical device number.
"wI"
identifies the bus converter for
Model 950 systems (usually "2/" or "61"), and is normally not entered in the run
string for non-950 systems. "x" is the system-dependent channel_address (e.g.,
Model 930
=
8, Model 925
=
4, etc.), and "y" is the
CIO
slot number.
3-6 Troubleshooting and Diagnostics